lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-26-2012, 04:17 PM   #1
Rasor
Not Yet Wild
 
Join Date: Sep 2012
Posts: 23
Default EZGO Medalist wiring

Hi All,
I am looking for wiring diagrams for a 1994 Medalist. Someone has fooled around with the wiring and tried to convert it to 3x12v batteries and when it didn't work tried to put it back again. Unfortunately, wires have been put back in the wrong place etc. Need diagrams of the solonoid lay out as I think this is the main problem.
Thanks
Rasor is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-26-2012, 10:36 PM   #2
Gonkulor
Astronautilator
 
Gonkulor's Avatar
E-Z-GO
 
Join Date: Sep 2011
Location: North Idaho
Posts: 1,494
Default Re: EZGO Medalist wiring

Try this http://bennettgolfcars.ca/manuals/ez...as%20parts.pdf

or this http://bennettgolfcars.ca/manuals/ez...%204-Caddy.pdf

or this http://bennettgolfcars.ca/manuals/ez...Bev%20Cart.pdf

Or lastly this http://bennettgolfcars.ca/manuals/ez...in%20Miser.pdf

One of those should be what you have.
Gonkulor is offline   Reply With Quote
Old 10-27-2012, 03:54 AM   #3
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: EZGO Medalist wiring

I'm guessing, but the odds are you have a '94 Medalist Series (series wound motor), which narrows it down to two different schematics out of the four possibilities.

The electrical difference between these two is where the solenoid activation circuit gets B+.

-----------

If your cart has a Run/Tow switch on the controller cover, it is a DCS and I'll post the other two schematics.

-----------

A previous owner changing from a 6 x 6V battery pack to a 3 x 12V battery pack and then back to a 6 x 6V pack shouldn't have involved messing with the control wiring, but you can never be sure since sometimes there are nuts on both ends on the wrench.
Attached Images
File Type: jpg Medalist Series schematic.JPG (119.2 KB, 0 views)
File Type: jpg Medalist Series - No Reed Switch - Schematic.JPG (72.4 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 10-27-2012, 04:16 AM   #4
Gonkulor
Astronautilator
 
Gonkulor's Avatar
E-Z-GO
 
Join Date: Sep 2011
Location: North Idaho
Posts: 1,494
Default Re: EZGO Medalist wiring

Quote:
Originally Posted by JohnnieB View Post
but you can never be sure since sometimes there are nuts on both ends on the wrench.
There is a statement if I ever heard one.
Gonkulor is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
97 ezgo medalist wiring Gas EZGO
Wiring a 95 Medalist Electric EZGO
1994 Medalist Wiring issue Electric EZGO
94 medalist wiring diagram Electric EZGO
1995 EZGO medalist wiring question Electric EZGO


All times are GMT -5. The time now is 09:03 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.