|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-15-2008, 10:59 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2008
Location: upstate SC
Posts: 5
|
EZ-GO won't go
I have a 1990 EZ-GO textron, I was told when I bought it , that it worked perfect but the barreries were dead. I replaced the batteries but it won't go. I have 36 volts from the batteries, 36v to the motor, i ran a direct power test to the motor and it ran fine. I've taken the forward reverse switch apart and cleaned it and checked for continuity, and it was fine also. All the micro switches are working, the solenoid clicks and has 36 volts. But it still won't go.I know I need to replace something but I'm not sure what, if anyone can help I would be forever in your debt. Thank you in advance
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-15-2008, 11:27 AM
|
#2 |
|
Gone Wild
 Join Date: Apr 2008
Location: Wichita, KS
Posts: 1,530
|
Re: EZ-GO won't go
Greetings ican1!
One of our experts will be along shortly... |
|
|
|
|
08-15-2008, 11:53 AM
|
#3 |
|
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: EZ-GO won't go
Jump the solenoid and see if it goes.
|
|
|
|
|
08-15-2008, 09:19 PM
|
#4 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: EZ-GO won't go
Welcome to the forum ican1...................
|
|
|
|
|
08-16-2008, 12:52 AM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2008
Location: upstate SC
Posts: 5
|
Re: EZ-GO won't go
Thanks for the welcome everyone. I forgot to post, I tried a solenoid jump that didn't work either.
|
|
|
|
|
08-16-2008, 07:39 AM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZ-GO won't go
Do you have a negative lead from the pack to the motor? And a hot positive lead from the solenoid to the speed controller? Is pos. power coming out of the speed controller?
You may want to put the cart up on blocks and start testing with the voltmeter. Follow the wiring diagram for the cart with the meter and see where the power stops..... |
|
|
|
|
08-16-2008, 07:15 PM
|
#7 |
|
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: EZ-GO won't go
This is a controller cart right?
|
|
|
|
|
08-18-2008, 09:24 AM
|
#8 |
|
Not Yet Wild
Join Date: Aug 2008
Location: upstate SC
Posts: 5
|
Re: EZ-GO won't go
Yes it has what looks like a curtis speed controller. I have 36v giong into it and 36v to the motor, but when I step on the pedal all it does is click.
|
|
|
|
|
08-26-2008, 08:26 AM
|
#9 |
|
Not Yet Wild
Join Date: Aug 2008
Location: upstate SC
Posts: 5
|
Re: EZ-GO won't go
Its been awhile I was just wondering if anyone had any more advice they could give me
|
|
|
|
|
08-26-2008, 11:26 AM
|
#10 |
|
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: EZ-GO won't go
Have you checked the throttle pot?
|
|
|
|
|
|
||||||
|
|
Linear Mode
