lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-17-2008, 04:27 PM   #11
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Electric EZ Go Wont Go

Check your reed switch.

Reed Switch Bypass
roady89 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-17-2008, 04:33 PM   #12
Not Yet Wild
 
Join Date: Jul 2008
Posts: 58
Default Re: Electric EZ Go Wont Go

Pull and jumped the reed circuit, prior to that we had no click on solenoid. Now we do but not in reverse only forward. replaced microswitch on reverse still no click. Could use a diagram of wiring on f/r and microswitchs?
powermgr is offline   Reply With Quote
Unread 08-17-2008, 04:44 PM   #13
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Electric EZ Go Wont Go

Download this service repair manual. It will have diagrams and troubleshooting advice.

Service Repair Manual

Owner's Manual & Service Guide

Service Parts Manual
roady89 is offline   Reply With Quote
Unread 08-17-2008, 04:50 PM   #14
Not Yet Wild
 
Join Date: Jul 2008
Posts: 58
Default Re: Electric EZ Go Wont Go

Thanks for your help. I have download this manual before. EZ go 2001, does that make a difference. This manual talks about PDS and Non pds, but I believe this cart is a non DCS and I have notices the differences. I was readling another tread you wrote about jumping the solenoid "just becase the solenoid clicks does not mean it is working", maybe will try that since the solenoid does not click in reverse.
Thanks for your help
powermgr is offline   Reply With Quote
Unread 08-17-2008, 04:57 PM   #15
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Electric EZ Go Wont Go

Yes, just because it clicks doesn't always mean its good but I don't think thats your problem. The solenoid IS working just not in reverse. It doesn't matter which direction your in the same wires power the solenoid. Only in reverse it's a different microswitch that does it. I think one of your microswitches is bad or you have a wire off or connected wrong.

The diagram in the manuals are the one you need. You have a Non-PDS. AKA "series style" cart.
roady89 is offline   Reply With Quote
Unread 08-17-2008, 05:10 PM   #16
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Electric EZ Go Wont Go

Here ya go. Good Luck!

series controller wiring schematic
roady89 is offline   Reply With Quote
Unread 08-17-2008, 05:21 PM   #17
Not Yet Wild
 
Join Date: Jul 2008
Posts: 58
Default Re: Electric EZ Go Wont Go

Great, looking at the diagram wiring for the directional configuration I have found two different things and I am confused.... MS2 shows blue wire from ignition connect then the blue wire to controller harness...there is no blue wire to the controller harness. The other diagram show blue wire from igntion and red wire to power not controller. Which one is correct?
http://www.ransomes-jacobsen.biz/spe...%20English.pdf
Page 63 and page 167
powermgr is offline   Reply With Quote
Unread 08-17-2008, 06:17 PM   #18
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: Electric EZ Go Wont Go

I'm not sure what the deal is with that. On page 167, wire labeled #9, according to the diagram "should" go to the reed switch. There are no other wires on MS2.
roady89 is offline   Reply With Quote
Unread 08-17-2008, 06:24 PM   #19
Not Yet Wild
 
Join Date: Jul 2008
Posts: 58
Default Re: Electric EZ Go Wont Go

That is kind of my thinking.
Well, then we have all the wire correctly placed. Solenoid clicks in forward not in reverse but that is oK. Total issue is the cart is not running. So the solenoid is good or should I replace it?
powermgr is offline   Reply With Quote
Unread 08-17-2008, 06:27 PM   #20
Not Yet Wild
 
Join Date: Jul 2008
Posts: 58
Default Re: Electric EZ Go Wont Go

Another issue I just realized, don't know if it will make a difference. on that same diagram the controller shows A2 which goes to the c bolt on the directional. Is this just because of the difference in years or what? Will that be an issue with the cart running?
powermgr is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
91 36V CC Wont Go! Electric Club Car
Electric Club Car wont Go-2 Electric Club Car
94 Ez Go Wont Go Electric EZGO
Electric Club Car wont Go!! Electric Club Car
she wont go so EZ Electric EZGO


All times are GMT -5. The time now is 12:13 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.