|
08-19-2008, 10:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2008
Posts: 2
|
Tallnut412
How Do You Remove The Speed Switch Contact Board,to Replace The Contacts And Replace The Speed Switch Wiper Contact On A 1989 Ez Go Marathon. Your Help Is Needed ..................
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-19-2008, 11:28 PM
|
#2 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Tallnut412
Welcome to the forum TALLNUT412............
|
|
|
|
|
08-20-2008, 06:24 AM
|
#3 | |
|
nimda
 Join Date: Jun 2007
Posts: 13,022
|
Re: Tallnut412
Quote:
You "Might" be able to replace one contact at a time without removing the speed board. It depends on whether you can get you hands/tools in there to remove and re-install the contacts. |
|
|
|
|
|
08-20-2008, 08:13 AM
|
#4 |
|
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: Tallnut412
The wiper arm shaft nut is the only thing holding the board to the mount. Loosen the shaft nut, disconnect the accelerator linkage and the whole assembly will slide up and off.
As roady says, make sure you note where all connections go first and disconnect the battery pack before servicing. HTH and good luck. |
|
|
|
Linear Mode
