08-27-2008, 02:36 PM | #1 |
Gone Wild
Join Date: Aug 2008
Location: Pine Mtn,Ga
Posts: 230
|
91 ezgo ??
have a 91 ezgo that i just aquired, after looking through the schematic that was sent to me from one of the members, noticed the
fnr micro switch ms-2 is missing in action, my question is is there anyway to "hotwire" this without the switch or is it required?? thanks for any help!! k |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-27-2008, 04:55 PM | #2 |
Gone Wild
Join Date: Aug 2008
Location: Pine Mtn,Ga
Posts: 230
|
Re: 91 ezgo ??
is there any way to "jump" a motor to make sure it works.... putting direct juice to it to make it run!!
|
08-27-2008, 06:52 PM | #3 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 91 ezgo ??
controller cart or resistor cart? the micro switches are only a few bucks so i would by the one you need.......the only problem with putting direct juice into the motor is it dosn,t take much to short something in the motor like the field coil or brush riggings...................................
|
08-27-2008, 07:23 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 91 ezgo ??
Send Private Message here http://www.buggiesgonewild.com/members/pggroves/ with as much information as you can....
He is almost psychic with these older ezgos.... |
08-27-2008, 09:29 PM | #5 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: 91 ezgo ??
gator, he's psychic.
|