PDS FNR switch relocation question

kgsc

OK gurus.

I want to relocate my FNR switch on my 2007 PDS cart to cover the hole where a series shift lever comes through. I have a new center off DP switch and housing but my question is wiring. It has the stock controller and stock low current wiring. Can I tap into the harness at the top of the controller of do I need to go all the way back to the dash ? My concerns is that there are some diodes or the like in the harness I am unaware off.

Thanks in advance..

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

ORTitan

Just plain wire on the last harness I bought.

JohnnieB

No diodes to worry about on a stock PDS system. J1Pin-1 connects to J1 Pin-3 for Forward and J1 Pin-2 for Reverse.

-------
The diodes that sometimes cause problems are in the F/R circuit of the Alltrax DCX to PDS adapter.
The DCX controller is actually designed a Plug-n-Play replacement for a DCS controller and they had to do some creative wiring to get it to work with stock PDS control harness.

ORTitan

Johnnie, you are THE MAN. You post up pertinent, Correct info.
Thank you!

kgsc

So plug J1, pin 1 to the center of the switch and 2 and 3 to the outer legs. Now all I have to do is do it.. Will take pics when done.

Thanks all