speed control

CB83 · 09-09-2008, 10:39 AM

Im new to the cart world and have a few questions.
I have a 1985 electric ezgo three wheeler.It is a resistor cart. It did not run when i got it. I have rebuilt the battery frames that were rusted out and am starting to check every thing with a multi meter. The motor is good and I am waiting for the new solenoid. My first question is, should all of the contacts on the speed control board be in contact when in WOT? I checked them for continuity through the sensor and they all light up when pedal is engaged. Is this normal? Thanks for the help.

09-09-2008, 10:39 AM	#1
CB83 Not Yet Wild Join Date: Sep 2008 Location: Texas Posts: 25	speed control Im new to the cart world and have a few questions. I have a 1985 electric ezgo three wheeler.It is a resistor cart. It did not run when i got it. I have rebuilt the battery frames that were rusted out and am starting to check every thing with a multi meter. The motor is good and I am waiting for the new solenoid. My first question is, should all of the contacts on the speed control board be in contact when in WOT? I checked them for continuity through the sensor and they all light up when pedal is engaged. Is this normal? Thanks for the help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
drive control system	Electric EZGO
Electronic speed control	Electric golf carts
g1 speed control	Electric Yamaha
speed control issue 92 e z go electric	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum