Solenoid question 96 ez go elect

kantuckian · 07-07-2013, 06:54 AM

My 96 electric ez go will not run when i push the acc down sol will activate but when i let off of the acc it will not disengage but if i can turn ign sw off or put cart in neutral and sol will disengage.has new batteries in cart.

JohnnieB · 07-07-2013, 07:21 AM

Series or DCS?
Stock or aftermarket controller?

kantuckian · 07-07-2013, 10:24 AM

stock controller series cart has a tow run sw

gornoman · 07-07-2013, 10:30 AM

Check the ITS microswitch in the box under the floormat. Good chance it is physically broken.

kantuckian · 07-07-2013, 11:04 AM

It seems ok when u push acc down the sol will acivate but when u relace the acc the sol remains activated until u cut ign sw off or put fwd/sw in netural pos.then it will decativate

JohnnieB · 07-07-2013, 11:07 AM

Quote:

Originally Posted by kantuckian

stock controller series cart has a tow run sw

If it has a Run/Tow switch, it is a DCS.
If it does not have a Run/Tow switch it is a series cart (Series wound motor)

If it is a series, it may just be a bad switch in pedal box.
If it is a DCS, it could also be a bad controller.

JohnnieB · 07-07-2013, 11:14 AM

Quote:

Originally Posted by kantuckian

It seems ok when u push acc down the sol will acivate but when u relace the acc the sol remains activated until u cut ign sw off or put fwd/sw in netural pos.then it will decativate

On a DCS cart, the controller activates/deactivates the solenoid.
The keyswitch and MS-2 on F/R assembly arm the solenoid and pedal switch tells the controller to activate the solenoid.

When key is turned off, or F/R is shifted, the solenoid is disarmed and the controller is reset.

If you have a DCS cart, it sounds like you have a bad controller.

kantuckian · 07-07-2013, 03:40 PM

Sounds right will change out controller tomorrow

07-07-2013, 06:54 AM	#1
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635	Solenoid question 96 ez go elect My 96 electric ez go will not run when i push the acc down sol will activate but when i let off of the acc it will not disengage but if i can turn ign sw off or put cart in neutral and sol will disengage.has new batteries in cart.
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635

07-07-2013, 07:21 AM	#2
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Solenoid question 96 ez go elect Series or DCS? Stock or aftermarket controller?

07-07-2013, 10:24 AM	#3
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635	Re: Solenoid question 96 ez go elect stock controller series cart has a tow run sw
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635

07-07-2013, 10:30 AM	#4
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,286	Re: Solenoid question 96 ez go elect Check the ITS microswitch in the box under the floormat. Good chance it is physically broken.

07-07-2013, 11:04 AM	#5
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635	Re: Solenoid question 96 ez go elect It seems ok when u push acc down the sol will acivate but when u relace the acc the sol remains activated until u cut ign sw off or put fwd/sw in netural pos.then it will decativate
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-07-2013, 03:40 PM	#8
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635	Re: Solenoid question 96 ez go elect Sounds right will change out controller tomorrow
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635

Similar Threads
Thread	Forum
Solenoid question	Electric Club Car
please help w/solenoid question	Gas Yamaha
Solenoid question	Electric EZGO
Solenoid question	Electric golf carts
elect 96 cc want move solenoid problem?	Electric Club Car