|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-20-2013, 04:38 PM | #1 |
Not Yet Wild
Join Date: Sep 2011
Posts: 65
|
Help with f/r problem
I have a custom built 07 pds cart. I had a upgraded motor, solenoid, and a Alltrax 600 installed. The cart ran fine for a day or two, but i noticed when putting it in forward, the back up buzzer would come on softly and then go off. Eventually it came on full blast in reverse and forward. The cart only had reverse after this happened. I reversed the f1 & f2 on the controller and it switched to only having forward.i tried a new diode on the solenoid and cleaned all connections. I was told the controller was bad. I finally ponied-up for another controller. After installing it, the back up buzzer is still full blast in reverse and forward. I did not try moving the cart for fear of toasting the new controller. Any thoughts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-20-2013, 06:40 PM | #2 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: Help with f/r problem
check white and black wires going to motor for rub spots or it is in the motor
|
07-20-2013, 08:03 PM | #3 |
Gone Wild
Join Date: May 2013
Location: Mississippi
Posts: 301
|
Re: Help with f/r problem
I would suspect the F-R switch......try unplugging wires from it & directly connecting the correct wires to put it in forward (I don't have a PDS, so don't know what color the 3 wires are at the switch....check the wiring diagram) & see if the beeper goes off & cart goes forward. Then connect the wires that put it in reverse. If it works correctly like this, then you have something going on in the switch.
|
07-21-2013, 03:36 PM | #4 |
Not Yet Wild
Join Date: Sep 2011
Posts: 65
|
Re: Help with f/r problem
tried another fwd/rev switch = same issue
totally disconnected f1 & f2 wires at the module = same issue Found out that with the run/tow switch in run position with the main key switch in the off position = same issue So frustrating. I can't afford to blow this module. I haven't even stepped on the gas pedal for fear of toasting it. Still thinking motor? |
07-21-2013, 04:38 PM | #5 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: Help with f/r problem
try unhooking white wire from controller and see if u get sound then try and unhook black wire see if one wire un hooked makes the double buzz go away if not start hunting wires
|
07-21-2013, 05:41 PM | #6 |
Not Yet Wild
Join Date: Sep 2011
Posts: 65
|
Re: Help with f/r problem
Disconnected one at a time - same problem
Disconnected plug between solenoid and controller - problem gone Solenoid wired wrong or bad? Sorry, I'm a newbie and thanks for the help! |
07-21-2013, 06:02 PM | #7 |
Not Yet Wild
Join Date: Sep 2011
Posts: 65
|
Re: Help with f/r problem
|
07-21-2013, 06:02 PM | #8 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: Help with f/r problem
noid has 5 wires blue to small term yellow to other small term then batt + to a big term plus a red wire then con + to the other
do u see any melted wires or smell anything |
07-21-2013, 06:03 PM | #9 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: Help with f/r problem
|
07-21-2013, 06:40 PM | #10 |
Not Yet Wild
Join Date: Sep 2011
Posts: 65
|
Re: Help with f/r problem
Okay, so one of the small terminals was grounded with a separate wire. Not sure why. The cart did originally run fine in both directions. I unhooked the ground and checked the wiring. All good there. I don't see any melted wires or smell any. I think I'm gonna call it a night because I'm to aggregated to keep checking!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2 carts, 1 has problem, 1 has another problem. combine for one cart? | Gas EZGO | |||
Good problem bad problem | Big Block Talk! | |||
Pds Problem | Electric golf carts | |||
Problem with EZ-GO | Electric EZGO | |||
New guy w/ problem | Electric EZGO |