|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-09-2013, 10:03 AM | #1 |
Not Yet Wild
Join Date: Aug 2012
Posts: 9
|
Custom EZGO RXV "limp mode" Need help please???
Good day, I'm in need of someones help please... I have a 2008 EZGO RXV that I have been working on for a while now, the cart seems to be in "limp mode"? It literally crawls in forwards and reverse? No idea here is what we have done to date.
Re manufactured controller brand new wiring harness new throttle and brake switches new brake controller controller has been programed to Golf 4 aftermarket additions: 20a fuse panel installed LED strip lighting underneath 48v to 12v voltage reducer added 200w marine stereo amp installed Single din DVD player and speaker extended top with sunroof DVD screen for back passengers custom seats with heat inside LED lighting in the sunroof RXV trunk custom silver colored elite dash kit Color reverse camera with night vision LED headlights and taillights 23" tires and Chrome rims Jakes 6" lift kit Jakes RXV chrome brush guard diamond plated quarter panels Attaching some photo's of the progress so far. The front end and dash are not in right now until I figure out this limp mode issue. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-09-2013, 08:20 PM | #2 |
Not Yet Wild
Join Date: Feb 2009
Location: Around Houston ,Tx.
Posts: 54
|
Re: Custom EZGO RXV "limp mode" Need help please???
Do you have a 12v to 12v converter installed? Sounds like a lot of stuff on the cart. could be killing the batteries. you might want to check where you are suppose to get your 12v
|
08-11-2013, 11:40 AM | #3 |
Gone Wild
Join Date: Apr 2012
Location: Georgia
Posts: 378
|
Re: Custom EZGO RXV "limp mode" Need help please???
If it is in limp mode I would load it on a trailer and get it to a dealer that has a programmer and have them scan your cart and look for a trouble code. There are so many electronics it is like a modern car, need the equipment to hook it up and tell you what is wrong could be a throttle sensor, brake pedal sensor, or selenoid the list goes on.
|
09-07-2013, 10:07 PM | #4 |
Not Yet Wild
Join Date: Aug 2012
Location: Lake Wylie sc
Posts: 36
|
Re: Custom EZGO RXV "limp mode" Need help please???
Have one here . Turn key on and it jumps back then forward. System test for the motor brake. Think it needs a new one . Old one has a release handle new one dont. If i could find programing software id use it with laptop like alltrax..Cant afford to go to ezgo. And FSIP told me they dont have one yet for this danaher controller
|
09-10-2013, 03:32 PM | #5 |
Not Yet Wild
Join Date: Dec 2012
Location: Roseville, MI
Posts: 67
|
Re: Custom EZGO RXV "limp mode" Need help please???
|
09-10-2013, 07:59 PM | #6 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: Custom EZGO RXV "limp mode" Need help please???
does it feels like the brake is draging or that the speed sensor is out. i ask cause i had that problem and turned out to be motor. i took brake off the end of motor and let it hang there pluged up to see if brake was dragging and wasnt that
|
Tags |
ezgo rxv, limp mode |
|
|
Similar Threads | ||||
Thread | Forum | |||
Clearing the Limp Mode that limits to 15mph | Tomberlin | |||
72v Camo Ezgo TXT, 9" lift, 26" mud tires, D&D motor, custom golf cart | Golf Carts and Parts | |||
2010 CC Precedent limp mode? | Electric Club Car | |||
Any way to put a "maint mode switch" in? | Gas Club Car | |||
2000 PDS...limp home mode problem. | Electric EZGO |