|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-23-2008, 04:50 AM | #1 |
Not Yet Wild
Join Date: Sep 2008
Posts: 3
|
1990 EZGO Marathon
I have replaced all of the f/r plates and solenoid switch. Cart quit while running have checked all wires and cables. Shows fully charged. Checked batteries. Where do i go from here?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-23-2008, 07:07 AM | #2 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: 1990 EZGO Marathon
Is this Marathon a solid state or resistor?
Did you get everything back the way it was? Check the key switch for voltage, check the pot box for continuity and the pot box micro. |
09-23-2008, 10:58 AM | #3 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: 1990 EZGO Marathon
Welcome to the forum keeper.............
|
09-23-2008, 04:00 PM | #4 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1990 EZGO Marathon
is it a resistor cart or controller cart?..................................
|
10-06-2008, 04:53 AM | #5 |
Not Yet Wild
Join Date: Sep 2008
Posts: 3
|
Re: 1990 EZGO Marathon
Hi I believe it is a resistor. I am a woman doing all the work by myself. I am not half bad. Not much help from anyone else. I take pictures before i tear anyything down. I know a little about everything and not much more. Have been working on my golf cart for over a year now. Still not running. After i replaced the solenoid switch it ran. And then it just quit while i was driving it. Any help would be very much appreciated. Batteries have been checked they are all fine. Shows fully charged. Its a 1990 marathon with a lift kit. F/R went out i replaced it all first then the solenoid. Not sure where to go from here.
|
10-06-2008, 08:56 AM | #6 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: 1990 EZGO Marathon
Can you post some pics of the battery bay? That would help.
|
10-18-2008, 05:25 AM | #7 |
Not Yet Wild
Join Date: Sep 2008
Posts: 3
|
Re: 1990 EZGO Marathon
Helllo i have sent pictures they are on page 2 of the album. Hope they help
|
10-18-2008, 10:30 AM | #8 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: 1990 EZGO Marathon
You have an electronic speed controller. It is the vertically mounted box right next to the solenoid with the 2/0 cables attached.
Jack up cart rear and put on jack stands first. Try jumping the large posts of the solenoid. Use a 6ga or larger cable to do this. Let us know if the wheels turn when you jump the solenoid. Did you check the items as Paxdad has suggested? Are all good? |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGo 1990 2 stroke wiring diagram needed | Gas EZGO | |||
1990 ez go marathon service manual | Gas EZGO | |||
1990 Ezgo Issue | Electric EZGO | |||
EZGO 91 Marathon | Electric EZGO |