|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-29-2013, 03:50 PM | #1 |
Not Yet Wild
Join Date: Jul 2012
Posts: 15
|
Low Voltage Blinks on a Alltrax DCX controller?
I am in the middle of this build and a couple of weeks ago I installed an Alltrax DCX 500 controller and was getting a error code of low voltage, so I called Alltrax and they told me they thought I had a bad solenoid and resistor, after they told me everything is hooked up right on the controller, so I ordered a heavy duty one and I am still getting the same 6 blinks on the controller, the solenoid didn't come with any directions, so I am wondering what or where the problem is?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Powewise charger blinks red | Electric EZGO | |||
Alltrax DCX 300 in EZGO DCS 1996 under voltage | Electric EZGO | |||
Testing voltage on an Alltrax controller | Electric Yamaha | |||
BBB 48v rear controller blinks 4 times | Electric EZGO | |||
controller blinks | Lifted Golf Carts |