|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-05-2013, 05:48 PM | #1 |
Not Yet Wild
Join Date: Sep 2013
Posts: 50
|
A2 post on controller
I am struggling with the motor to controller hook ups. I am using a great schematic but I am not able to tell which wires are which coming off the motor in order to attach them correctly.
I have a 97 ezgo txt with an after market motor. It seems like A2 hook up on the controller calls for two wires, one from motor and one from reverse switch. I also need to figure out which wire from the motor hooks to the m- hook up. Any suggestions for this? Thanks in advance. I have also attached two pics of the motor. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2013, 05:49 PM | #2 |
Not Yet Wild
Join Date: Sep 2013
Posts: 50
|
Re: A2 post on controller
Second pic from above
|
10-05-2013, 06:02 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: A2 post on controller
If you don't have A2 those two cables make one and just bypass the control.
Hope this helps... determine which is which by where they went? |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
3 post required to Post in For Sale - Classifieds | Golf Carts and Parts | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
how can I post a picture of the controller? | Electric EZGO | |||
86 Club Car won't run on 36 volt post will on 18 or 24 post | Electric Club Car | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |