lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-06-2013, 09:19 AM   #1
Gone Wild
 
Join Date: Jun 2011
Posts: 165
Default Alltrax 1/2 speed reverse.

If I uncheck the 1/2 speed reverse option when programming an Alltrax AXE controller, it doesn't actually disable the 1/2 speed reverse. Why is that?
TGJR is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-06-2013, 09:24 AM   #2
BGW Sponsor
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 66,837
Default Re: Alltrax 1/2 speed reverse.

Maybe you didn't save the changes? go back and look, if not, uncheck the box then save (set) - I like to go to the throttle table page and come back to home page to see if the change stuck
Alltrax recommends you close the program and then reopen it to see if your changes stuck.
scottyb is offline   Reply With Quote
Unread 10-06-2013, 09:31 AM   #3
Gone Wild
 
Join Date: Jun 2011
Posts: 165
Default Re: Alltrax 1/2 speed reverse.

The changes save no problem. I've experienced the same thing on all 5 of the AXE controllers I have come across. I figured it was either a glitch or might have been disabled in the programming for liability purposes.

Is there any harm in just running without the orange reverse wire connected?
TGJR is offline   Reply With Quote
Unread 10-06-2013, 09:38 AM   #4
BGW Sponsor
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 66,837
Default Re: Alltrax 1/2 speed reverse.

no - no harm
scottyb is offline   Reply With Quote
Unread 10-06-2013, 09:42 AM   #5
Gone Wild
 
Join Date: Jun 2011
Posts: 165
Default Re: Alltrax 1/2 speed reverse.

Good deal. I'm going to hook the 1/2 speed reverse wire up to a toggle so it can be turned on and off as needed.
TGJR is offline   Reply With Quote
Unread 10-06-2013, 11:38 AM   #6
BGW Sponsor
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 66,837
Default Re: Alltrax 1/2 speed reverse.

Quote:
Originally Posted by TGJR View Post
Good deal. I'm going to hook the 1/2 speed reverse wire up to a toggle so it can be turned on and off as needed.
That's a kiddie switch.
scottyb is offline   Reply With Quote
Unread 10-06-2013, 06:17 PM   #7
Gone Wild
 
sportcoupe's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
Default Re: Alltrax 1/2 speed reverse.

Sometimes you need full power reverse, sometimes you need more precision 1/2 speed reverse backing up, especially with a high amp controller and even more so with a custom motor.
sportcoupe is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax DCX400 Speed and Torque Question Electric EZGO
Alltrax speed controller disappointment Electric Club Car
Does the speed sensor affect reverse speed? Electric Club Car
1998 EZ-Go Series TXT with new Alltrax & F&R wont move in Reverse Electric EZGO
New Alltrax Line up of Speed Controls Announcements


All times are GMT -5. The time now is 03:36 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.