|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-06-2013, 08:19 AM | #1 |
Gone Wild
Join Date: Jun 2011
Posts: 191
|
Alltrax 1/2 speed reverse.
If I uncheck the 1/2 speed reverse option when programming an Alltrax AXE controller, it doesn't actually disable the 1/2 speed reverse. Why is that?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-06-2013, 08:24 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 1/2 speed reverse.
Maybe you didn't save the changes? go back and look, if not, uncheck the box then save (set) - I like to go to the throttle table page and come back to home page to see if the change stuck
Alltrax recommends you close the program and then reopen it to see if your changes stuck. |
10-06-2013, 08:31 AM | #3 |
Gone Wild
Join Date: Jun 2011
Posts: 191
|
Re: Alltrax 1/2 speed reverse.
The changes save no problem. I've experienced the same thing on all 5 of the AXE controllers I have come across. I figured it was either a glitch or might have been disabled in the programming for liability purposes.
Is there any harm in just running without the orange reverse wire connected? |
10-06-2013, 08:38 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 1/2 speed reverse.
no - no harm
|
10-06-2013, 08:42 AM | #5 |
Gone Wild
Join Date: Jun 2011
Posts: 191
|
Re: Alltrax 1/2 speed reverse.
Good deal. I'm going to hook the 1/2 speed reverse wire up to a toggle so it can be turned on and off as needed.
|
10-06-2013, 10:38 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 1/2 speed reverse.
|
10-06-2013, 05:17 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Alltrax 1/2 speed reverse.
Sometimes you need full power reverse, sometimes you need more precision 1/2 speed reverse backing up, especially with a high amp controller and even more so with a custom motor.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax DCX400 Speed and Torque Question | Electric EZGO | |||
Alltrax speed controller disappointment | Electric Club Car | |||
Does the speed sensor affect reverse speed? | Electric Club Car | |||
1998 EZ-Go Series TXT with new Alltrax & F&R wont move in Reverse | Electric EZGO | |||
New Alltrax Line up of Speed Controls | Announcements |