|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-08-2013, 05:57 AM | #1 |
Gone Wild
Join Date: Jun 2012
Location: mississippi
Posts: 203
|
Input shaft seal
I noticed some oil leaking around the input shaft when I removed my motor. Where can I find a seal kit? Any sponsors here that sell them?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-08-2013, 05:58 AM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Input shaft seal
|
10-08-2013, 06:44 AM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Input shaft seal
I've never seen a seal on any of the input shafts I've pulled, only bearings and the retaining clip.
|
10-08-2013, 08:20 AM | #4 |
Gone Wild
Join Date: Aug 2013
Posts: 187
|
Re: Input shaft seal
There is an O ring that seals the outside of the sealed bearing on the input shaft on the motor side. This is the only sealed bearing in the differential. There are 6 O rings in the rear differential
http://www.golfcartking.com/EZGO-Gas...Kit-p/9524.htm |
10-08-2013, 08:36 AM | #5 |
Gone Wild
Join Date: Aug 2013
Posts: 187
|
Re: Input shaft seal
Here is a link to the Dana book that Yurtle put in a different post. See page 7.
Dana Axle: http://www.buggiesgonewild.com/attac...5-28148g01.pdf |
10-08-2013, 04:53 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Input shaft seal
Yamaha makes a kit to eliminate input shaft leaks. Fits ezgo too (not sure about rxv, but it has a real seal anyway). Yamaha Part (99999-JU20000). A press will be needed to replace the bearing , with or without this kit. Kit includes a oil slinger to put behind bearing, bearing, and o-ring. Fits all electric with dana axle that i have seen, unsure about rxv.
|
10-08-2013, 05:35 PM | #7 |
Gone Wild
Join Date: Aug 2010
Location: brooksville fl
Posts: 412
|
Re: Input shaft seal
Rxv has a real seal and a o ring seal as we'll.
|
10-08-2013, 06:16 PM | #8 |
Gone Wild
Join Date: Jun 2012
Location: mississippi
Posts: 203
|
Re: Input shaft seal
Mine is an electric TXT , when took the motor off there was a little oil leaking. Is this an easy fix by just replacing a seal or o-ring? I didn't want to ruin my motor
|
10-08-2013, 06:31 PM | #9 |
Gone Wild
Join Date: Jul 2011
Location: Panama City, Fl.
Posts: 401
|
Re: Input shaft seal
The new input shaft I bought for my '96 TXT had a seal...and the bearings were not sealed. Shop said it was the new style for what that is worth.
|
10-08-2013, 07:10 PM | #10 |
Gone Wild
Join Date: Jun 2012
Location: mississippi
Posts: 203
|
Re: Input shaft seal
Do you just remove the snap ring and change the seal or do you have to pull out the input shaft?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Part Number Help, Please - Input Shaft Seal | Electric EZGO | |||
Input shaft seal cap | Electric EZGO | |||
Input Shaft Oil Seal | Gas Club Car | |||
EZGO Input shaft seal replacement | Electric EZGO | |||
Oil leak at input shaft seal | Electric Yamaha |