|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-08-2013, 08:46 PM | #1 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
98 DCS Won't go
I need a little or lot of help. I have a 98 DCS that just quit while riding it.
I downloaded troubleshooting and ran the tests, If I understand it right the red wire from the tow run switch has failed. how do I check the wire? Thanks.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-08-2013, 08:54 PM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,976
|
Re: 98 DCS Won't go
find the two ends......connect the two leads, one on each end......then check continuity of the wire.
|
11-09-2013, 08:33 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 98 DCS Won't go
On the diagram below you can see the run/tow switch is actually 2 switches with 2 sources. One source is a junction on the + solenoid activation post. The other source is through the reed switch in the charger receptacle. The reed switch is a known weak point simply bypass it if it has failed.
|
11-09-2013, 08:53 AM | #4 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
Re: 98 DCS Won't go
Thanks Scottyb I have already bypassed the reed switch. that didn't solve it.
I guess I'll start chasing red wire. |
11-09-2013, 09:03 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 98 DCS Won't go
yep
|