|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-26-2013, 04:16 PM | #1 |
Not Yet Wild
Join Date: Nov 2013
Posts: 1
|
Melex cutting out when putting pedal to metal.
Maybe someone could help m out. I have a 1991 Melex golf cart and recently It started being wierd. It has a hi and low speed motor in it but when I have the gas pedal pushed down to far it cuts out. I have to balance it about halfway down in either gear. Could this possibly be a simple fix?
Thanks...I dont want to spend 80.00 to have a shop find a loose wire or something.! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-26-2013, 07:37 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Melex cutting out when putting pedal to metal.
Bad or maladjusted Pot Box (Throttle)
Curtis controllers with pot box type throttles, cut off if the throttle signal goes out of range on the high end. Don't know what the pot range should be, but if they are true EZGO clones, it is probably 0 to 5k Ohms. |
|
|
Similar Threads | ||||
Thread | Forum | |||
'01 CarryAll2 key start, cutting spark when pedal is pressed | Gas Club Car | |||
Rage metal cutting saw | Garage and Workshop | |||
Metal cutting saws | Design Center | |||
Cutting Expanded Sheet Metal | Design Center | |||
Metal Cutting ?? | Design Center |