|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-20-2014, 06:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2014
Posts: 2
|
Fuse for Power Wise Charger
Im having a problem with my power wise charge smoking when I plug it in
so I took the cover off and noticed my board was burnt up so I ordered a new one, but my question is that where the picture shows a fuse mine does not have one, is this a big problem and should I add one |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-20-2014, 07:37 PM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Fuse for Power Wise Charger
It will work without a fuse, but the smoke may turn into flames.
|
|
|
|
|
01-20-2014, 08:01 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2014
Posts: 2
|
Re: Fuse for Power Wise Charger
Thanks, I probably need to add one so I don't have a fire
|
|
|
|
|
01-21-2014, 08:09 AM
|
#4 |
|
Gone Wild
Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
|
Re: Fuse for Power Wise Charger
Also check your diodes! If the fuse was blown, the diodes may be bad. Someone before you probably replaced the fuse and it will blow again if the diodes have a short. Disconnect the wires from them to test. Continuity in one direction and no continuity in the other. Most meters have a diode check function on them also.
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| power wise charger | Electric EZGO | |||
| power wise charger | Electric EZGO | |||
| Power Wise charger | Electric EZGO | |||
| Power Wise Charger worked after board replaced now back to no power | Electric EZGO | |||
| Power Wise charger | Electric EZGO | |||
Linear Mode
