|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-01-2014, 03:54 PM | #1 |
Not Yet Wild
Join Date: Feb 2014
Posts: 2
|
2002 TXT Series no Solonoid Click Wont Move F or R
Just replaced F R switch and all cables. No sound from Solonoid when Key activated. Cart will run when I hot wire the solonoid to the + side of the battery. Did I kill my controller? How do I check these items?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-01-2014, 08:17 PM | #2 |
Gone Wild
Join Date: Jan 2014
Location: South Georgia
Posts: 1,120
|
Re: 2002 TXT Series no Solonoid Click Wont Move F or R
I am sure someone more qualified than myself will help you. What prompted you to change out the F R switch and wiring? Was it working before you did this work? You can use the search feature to look for more information troubleshooting this.
|
02-01-2014, 10:18 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2002 TXT Series no Solonoid Click Wont Move F or R
Check the microswitches on the F&R, be sure the wires on them are on the "com" and "nc" terminals of micros. They can be tested with the 200v DC setting on your meter, with the black lead to main negative. Next, find small red wire at charge plug under seat, unplug small wire and temporarly hook the longer portion of the wire to the main + terminal on the pack (36v +).
|
02-02-2014, 09:26 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2002 TXT Series no Solonoid Click Wont Move F or R
This install instruction shows the correct F&R ms wiring.
|
02-02-2014, 11:24 AM | #5 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2002 TXT Series no Solonoid Click Wont Move F or R
Quote:
Since you just replaced the F/R switch assembly, the microswitch labeled MS-2 on the attached schematic is a likely suspect. Could be miss-wired or the roller isn't dropping into the indentations in the outer circumference of the cam. |
|
02-03-2014, 09:57 AM | #6 |
Not Yet Wild
Join Date: Feb 2014
Posts: 2
|
Re: 2002 TXT Series no Solonoid Click Wont Move F or R
Thank you everyone for your help!! I used a jumper from the red wire on the F/R switch to the positive terminal of the batteries and she runs! I guess the dreaded reed switch is defective.
|
02-03-2014, 10:13 AM | #7 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2002 TXT Series no Solonoid Click Wont Move F or R
Quote:
Glad you got your cart going again. |
|
Tags |
controller, solonoid |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo TXT Series wont move, well it reverse for a second | Electric EZGO | |||
1998 EZ-Go Series TXT with new Alltrax & F&R wont move in Reverse | Electric EZGO | |||
2002 EZ GO 36V Series, Wont go | Electric EZGO | |||
2002 Series ITS cart won't move without jumper to solenoid | Electric EZGO | |||
Help 03 Series cart clicking but wont move after 15 min | Electric Club Car |