|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-14-2014, 05:17 PM | #1 |
Not Yet Wild
Join Date: Mar 2014
Location: Gold Coast Australia
Posts: 6
|
ezgo 01 14 mph with freedom chip
Hello all. Firstly I want to say what a great site. This site has helped me heaps during this build. A hell of a lot of local knowledge. Anyway I am only getting 14 mph with freedom chip installed. There are no beeps even in reverse. Please help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-14-2014, 05:25 PM | #2 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: ezgo 01 14 mph with freedom chip
Welcome to BGW! There is something wrong if you are only going that fast! What year is the cart? Also, what is the pack voltage when your are only going this fast? When you put it in diag mode, anything? We would all love to see pics of your build!!!!!
|
03-14-2014, 07:27 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: ezgo 01 14 mph with freedom chip
Are you sure it is a freedom chip? Check it with the chart attached. You 14 mph indicates you may have any chip other then freedom installed, probably mild hill (yellow).
|
03-14-2014, 07:48 PM | #4 |
Gone Wild
Join Date: Jan 2012
Location: Jarrettsville, MD
Posts: 326
|
Re: ezgo 01 14 mph with freedom chip
I guess confirmation of that would be if you have regenerative braking when you let off the go pedal.
|
03-14-2014, 08:37 PM | #5 |
Not Yet Wild
Join Date: Mar 2014
Location: Gold Coast Australia
Posts: 6
|
Re: ezgo 01 14 mph with freedom chip
I have 2 red chips. Both have same results. I have heard switching from neutral to reverse 5 times should indicate what seeing it is in but no beeps. Reverse beep does not work either. Maybe this could have something to do with it. I did try to read a lot of posts bit found nothing that helped. Not sure of the voltage draw. I don't have the tools for that.
|
03-14-2014, 08:38 PM | #6 |
Not Yet Wild
Join Date: Mar 2014
Location: Gold Coast Australia
Posts: 6
|
Re: ezgo 01 14 mph with freedom chip
By the way. Rebuild pics in my profile.
|
03-15-2014, 05:40 AM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: ezgo 01 14 mph with freedom chip
Seen this speed issue before with another member and I believe it was a controller bad.
About the no reverse beeper, someone may have unplugged the reverse beeper located behind the key plate. |
03-15-2014, 05:16 PM | #8 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: ezgo 01 14 mph with freedom chip
I think it was me. I ended up replacing the controller, but still had intermittent problems. Ended up being the reed switch........
|
03-15-2014, 06:50 PM | #9 |
Not Yet Wild
Join Date: Mar 2014
Location: Gold Coast Australia
Posts: 6
|
Re: ezgo 01 14 mph with freedom chip
Good news. I found a wire off the buzzer reconnected it and now 18 mph. Looks like I need something else so I can get low 20s.
|
03-15-2014, 07:00 PM | #10 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: ezgo 01 14 mph with freedom chip
Now the fun starts.........
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2004 EZGO TXT PDS - Freedom Chip Problems | Electric EZGO | |||
2010 EZGO PDS - Freedom Chip w/ 6" lift??? | Electric EZGO | |||
PDS with Freedom chip...Only hear 2 beeps meaning Steep Hill chip? | Electric EZGO | |||
Speed Freedom Chip or Steep Hill Chip? | Electric EZGO | |||
Ezgo 2001 lift kit and freedom chip | Electric EZGO |