|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-17-2014, 04:01 PM | #1 |
Not Yet Wild
Join Date: Oct 2013
Location: Cumming, GA
Posts: 16
|
EZ-GO PDS Field Map #4 File
Greetings,
I was wondering if anyone knows where I can find the field map file for an alltrax dcx500 on a 2000 ezgo TXT pds with stock motor? I believe it's field map #4. I've emailed alltrax for info but no luck. The controller was originally purchased for a Yamaha G19 and was sent with a field map #8. Thanks in advance for your help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-17-2014, 06:34 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: EZ-GO PDS Field Map #4 File
When you get few more posts, pm me your email and I can send them to you.
|
03-17-2014, 06:43 PM | #3 |
Not Yet Wild
Join Date: Oct 2013
Location: Cumming, GA
Posts: 16
|
Re: EZ-GO PDS Field Map #4 File
|
03-17-2014, 06:51 PM | #4 |
Gone Wild
Join Date: Jan 2012
Location: Jarrettsville, MD
Posts: 326
|
Re: EZ-GO PDS Field Map #4 File
So tell us a little about your cart, Irod007. We may as well use this thread to boost your post count now!
|
03-17-2014, 07:05 PM | #5 |
Not Yet Wild
Join Date: Oct 2013
Location: Cumming, GA
Posts: 16
|
Re: EZ-GO PDS Field Map #4 File
Hello 720Deere,
I bought a 2000 EZ-GO TXT PDS late last summer for driving to the tennis courts and pool. It's pretty much stock everything, but now that I've had it for 4 mo. I want to make it better. The first thing that I've noticed as something needed is the torque. I live in somewhat of a hilly area and the wife had complained of the golf cart struggling when going to her friends house. I know that if I want more torque I would need to increase current. I found an alltrax dcx500 for really cheap on ebay and ended up with winning bid. I got all the pieces needed to upgrade (PDS adapter, solenoids, cables, diode and resistor) but no field map to support the stock motor. I appreciate you guys taking a look and helping me out. I'm sure I will be posting a lot more questions once I get going with replacing the controller. |
03-17-2014, 07:53 PM | #6 |
Gone Wild
Join Date: Jan 2012
Location: Jarrettsville, MD
Posts: 326
|
Re: EZ-GO PDS Field Map #4 File
Oh boy, your wife would hate my cart if she doesn't like how a cart on stock tires responds to hills. Big tires make a big difference in that department and not for the better. I can run 23 mph on flat ground, but drop down to 12-13 on the hills. A DCX500 is in my future.
I wish I could help you, but all I can really do is help you get the number of posts that you need so you can message kgsc to get your map. I guess if you wanted it bad enough you could just post your email address in this thread. |
03-17-2014, 08:01 PM | #7 |
Not Yet Wild
Join Date: Oct 2013
Location: Cumming, GA
Posts: 16
|
Re: EZ-GO PDS Field Map #4 File
Believe or not you did help me, I was happy to see my pm privies appear a little after I replied to your post.
I hope the dcx500 is not too much, I only got it because it was a lot cheaper than the dcx400. Thanks again 720Deere! |
03-17-2014, 08:37 PM | #8 |
Gone Wild
Join Date: Jan 2012
Location: Jarrettsville, MD
Posts: 326
|
Re: EZ-GO PDS Field Map #4 File
The beauty of the 500 is you can dial it back to only 400 if you need to yet if you upgrade your motor at some point you will not need to upgrade your controller! Glad to hear that the PM magic appeared for you.
|
03-17-2014, 09:20 PM | #9 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: EZ-GO PDS Field Map #4 File
I feel 400a is max for a happy life for stock PDS motor. NEVER use gas pedal to hold on hills, use brake. (i know, seems dumb, but motor wont last a year if you do not follow this)
|
03-18-2014, 06:07 AM | #10 | |
Not Yet Wild
Join Date: Oct 2013
Location: Cumming, GA
Posts: 16
|
Re: EZ-GO PDS Field Map #4 File
Quote:
Thanks again! |
|