lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-24-2014, 06:11 PM   #1
Not Yet Wild
 
Join Date: Mar 2014
Posts: 2
Default 120sx controller

I have a 10 pin card on top of controller can anyone tell me how much voltage is supposed to come out of the wires, there are 9 of them, are they all supposed to be the same voltage or some less. ? this is a 1206sx controller. I think. I have a ezgo txt e598 modelpds
mudcat1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-24-2014, 07:18 PM   #2
BGW Sponsor
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 67,067
Default Re: 120sx controller

Johnnie ......where r u ?
scottyb is offline   Reply With Quote
Unread 03-25-2014, 05:26 AM   #3
Not Yet Wild
 
Join Date: Mar 2014
Posts: 2
Default Re: 120sx controller

I think I found the answer. thanks,
mudcat1 is offline   Reply With Quote
Unread 03-25-2014, 11:32 AM   #4
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 14,555
Default Re: 120sx controller

Us old guys have to take naps occasionally.

He said he got the answer, but didn't say what the answer was, so I'll take a stab at it from what he provided.

The date code (E59 indicates it was made in 1998.
A Curtis 1206SX is a DCS controller, further confirmed by a 10 pin plug, since a series controller (Curtis 1206) has a 6 pin plug and a PDS controller (Curtis 1206MX) has multiple plugs.

Sounds like he has a 1998 DCS, but it could be a Medalist (Metal body) or a TXT (Plastic body), or one of the other body styles EZGO made in 1998.

As for the voltage on the pins. it depends on how the Run/Tow, F/R and Key switches are set and if the pedal is pushed or not.
JohnnieB is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
WTS/WTT 400amp SepEx Controller for Series Controller Golf Carts and Parts
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller Electric Club Car
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller Golf Carts and Parts
a DC motor controller ( electronic speed controller) Golf Carts and Parts
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 Electric EZGO


All times are GMT -5. The time now is 06:17 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.