lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-12-2008, 10:16 PM   #11
Getting Wild
E-Z-GO
 
Join Date: Sep 2008
Location: sterling heights mich.
Posts: 82
Default Re: controller upgrade question

ok thanks for the imput i will do that tomorrow and see what i'm missing thanks.
clutch is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-12-2008, 10:27 PM   #12
Gone Wild
 
Paxdad's Avatar
E-Z-GO
 
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
Default Re: controller upgrade question

I gave you some incorrect info in my last post. The #1 blue wire from the pot micro goes to the #1 post on the controller. The #2 wire goes from the NC on the pot micro to the solenoid. The #3 red wire in the photo goes from the COM of the pot micro to the single micro NC on the back of the F/R switch. THe white and black wires from the pot go to the 2 and 3 post on the controller. The photo above is wired exactly as it came from Ezgo.
Paxdad is offline   Reply With Quote
Unread 10-12-2008, 10:43 PM   #13
Getting Wild
E-Z-GO
 
Join Date: Sep 2008
Location: sterling heights mich.
Posts: 82
Default Re: controller upgrade question

thank you very much for all your help now i can install these parts and not worry about a melt down. Do you think i will see any performance increase or extended battery time wth this upgrade at all.
clutch is offline   Reply With Quote
Unread 10-12-2008, 10:55 PM   #14
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,101
Default Re: controller upgrade question

Yes, you should see a gain in accessable amps. So initial acceleration should increase and low end torque will also increase. Top end should be the same but, you should get there faster!
scottyb is online now   Reply With Quote
Unread 10-12-2008, 11:10 PM   #15
Getting Wild
E-Z-GO
 
Join Date: Sep 2008
Location: sterling heights mich.
Posts: 82
Default Re: controller upgrade question

Ok that sounds great once i install these parts what do you recomend i do to get more top end speed out of it. basically it is for cruising the streeets and will be used on the 2 tracks of my property up north the trails are smooth not really looking to do off roading just getting close to the deer blinds. any suggestion short of buying a new motor.
clutch is offline   Reply With Quote
Unread 10-12-2008, 11:16 PM   #16
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,101
Default Re: controller upgrade question

A lift and a little taller tire?
scottyb is online now   Reply With Quote
Unread 10-13-2008, 02:30 PM   #17
Gone Wild
 
buckmanmike's Avatar
 
Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,062
Default Re: controller upgrade question

Check your new controller and see if its rated to 48v. Raising volts will give you more speed and torque.
buckmanmike is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Controller upgrade 300 - 400a Electric EZGO
Motor and controller upgrade Electric Club Car
Controller upgrade problem Electric EZGO
controller upgrade Electric Club Car
Upgrade to controller question Electric EZGO


All times are GMT -5. The time now is 05:33 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.