|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-14-2008, 09:55 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 49
|
2002 800E workhorse, ideas for mas power?
Hello everyone,
I wanted to say thanks for all the help I've been getting from this forum. It helped me get an old 87 resistor 3 wheeled cart going again. It also gave me the bug to acquire the workhorse pictured. Thanks again for everyones help. Look forward to learning a whole lot more. Anyway, I bought a 2002 EZ GO 800E workhorse. Everything seems fine, batteries and cables new in 07, all connections to motor fine. I am posting to confirm that this is a non dcs model. From what I've gathered from the stickies, my model is a non dcs vehicle. First, I wanted to confirm that, and second, I wanted to see what "mods" are available from the guys here, as well as the sponsors. Does variable speed chips work on these style models? Also, does 4 AWG cables versus 6 AWG cables prove a difference in performance? Thanks again for all the help, both past and present. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-14-2008, 10:10 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 49
|
Re: 2002 800E workhorse, ideas for mas power?
Ah, patience grasshopper...........
I searched DCS via forums, answered whether chips would work. Old post shows it will not. Answering my own questions through searches has lead to couple more. Since I have a DCS, where would I locate the tow/run switch, assuming I have one. It should be ON the controller box, is that correct? I cannot seem to locate said switch, but maybe its a fleet. I'll let the experts let me know. Thanks |
|
|
|
|
10-14-2008, 10:55 PM
|
#3 |
|
Gone Wild
 Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,304
|
Re: 2002 800E workhorse, ideas for mas power?
Wish I could help, but thats like a new cart to me. All I have are old carts. I don't know, hang in there someone will help you shortly.
|
|
|
|
|
10-15-2008, 04:01 PM
|
#4 |
|
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 2002 800E workhorse, ideas for mas power?
Looks like you have a standard series type controller cart. (fleet) Those are the most abundant as far as mods go....controllers, motors....all kinds of stuff.
|
|
|
|
|
10-15-2008, 04:46 PM
|
#5 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 49
|
Re: 2002 800E workhorse, ideas for mas power?
But for the cheapy quick mods, no "speed chips" for the fleet cars. Am I safe to assume that. I guess the 4 AWG cables are the only cheap electrical upgrade.
|
|
|
|
|
10-15-2008, 04:54 PM
|
#6 |
|
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 2002 800E workhorse, ideas for mas power?
No speed plugs for fleet cars. Yes, 4 gage cables are probly the cheapest.
|
|
|
|
|
10-15-2008, 04:58 PM
|
#7 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 49
|
Re: 2002 800E workhorse, ideas for mas power?
Thanks for the help.....
|
|
|
|
|
10-15-2008, 09:48 PM
|
#8 |
|
Gone Wild
Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,304
|
Re: 2002 800E workhorse, ideas for mas power?
Cheapest speed mod would probably be, have motor redone by EMP. You can keep your original controller. Also taller tires will give you 1-3 mph increase.
|
|
|
|
|
10-16-2008, 09:03 AM
|
#9 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 49
|
Re: 2002 800E workhorse, ideas for mas power?
For those guys out that have already got work done by EMP, whats the turnaround time?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| need more power 2002 ez go 6 pass | Gas EZGO | |||
| Need some ideas for a tow strap | Gas EZGO | |||
| any ideas? | Gas Yamaha | |||
| Any ideas before i rip it apart? | Gas EZGO | |||
| new pics of my workhorse with jack shaft and power steering | Gas EZGO | |||
Linear Mode
