|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-17-2014, 03:01 PM
|
#1 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Barely Hear Reverse Buzzer
I purchased a one year old RXV to replace my aging Yamaha. The reverse buzzer was a bit too loud so I did what I've always done and put a piece of duct tape across the top of it to quiet it some. That made the buzzer nearly inaudible so after a week I removed the tape but got no increase in volume. Anything I can do besides lay down $40 for a new one? I want to know/hear when I'm in reverse so I'll take the obnoxious too loud over "can't hear it."
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-17-2014, 03:14 PM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2014
Location: Northwest USA
Posts: 57
|
Re: Barely Hear Reverse Buzzer
haha normally people want it eliminated! its possible that a wire is loose causing poor electrical try shaking it about a little, also make sure that no junk filled it up. Im sure you could just ask around here for one.. lots of people remove them entirely so they will have some sitting around in a pile.
|
|
|
|
|
06-17-2014, 03:19 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: Barely Hear Reverse Buzzer
Thanks. I fiddled with it a bit and got very little change in volume. Some folks at my club are deaf as a post so I probably need to full volume to keep from backing over them.
|
|
|
|
|
06-17-2014, 03:26 PM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2014
Location: Northwest USA
Posts: 57
|
Re: Barely Hear Reverse Buzzer
|
|
|
|
|
06-17-2014, 04:14 PM
|
#5 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: Barely Hear Reverse Buzzer
Maybe a bit over the top. I don't want to join the walking deaf sooner than necessary. I'm certainly open to any BGW member who wants to off load their buzzer.
|
|
|
|
|
06-17-2014, 06:32 PM
|
#6 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
|
Re: Barely Hear Reverse Buzzer
You need to be careful with the RXV beeper because if it isn't right, the cart won't run. You could check to see if something got wedged in there.
|
|
|
|
|
06-19-2014, 03:42 PM
|
#7 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: Barely Hear Reverse Buzzer
The hole covering the metal buzzer plate is clear but there is no real access beyond that. I may try some compressed air.
|
|
|
|
|
06-19-2014, 04:54 PM
|
#8 |
|
Not Yet Wild
Join Date: May 2014
Location: Texas
Posts: 61
|
Re: Barely Hear Reverse Buzzer
mine only beeps when I put the switch in reverse and stops beeping when I press the pedal and start going in reverse . does that make any sense?
|
|
|
|
|
06-19-2014, 06:15 PM
|
#9 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Barely Hear Reverse Buzzer
That makes no sense at all. The point is to warn other people, not just the driver. At least that's the way all heavy construction equipment is.
|
|
|
|
|
06-20-2014, 07:50 AM
|
#10 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: Barely Hear Reverse Buzzer
The buzzer should continue to sound as long as the switch is in reverse regardless of the pedal position.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
| Reverse Buzzer | Electric EZGO | |||
| reverse buzzer | Electric Club Car | |||
| How do i get to my reverse buzzer? | Electric EZGO | |||
| reverse buzzer? | Electric Club Car | |||
Linear Mode
