|
| |||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
| Thread Tools | Display Modes |
07-26-2014, 06:49 PM
| #1 |
| Not Yet Wild Join Date: Jun 2012
Posts: 14
|  Imaginative MFG input shaft I'm sure some of my verbiage is wrong but at least I have a pic!!! I've got an Ezgo TXT with an Imaginative Mfg 2 speed diff. After stripping axles and trouble shooting everything, I found the issue. I've got a stripped input shaft. Given the price of the diff, I'm almost in a panic!!! Does anyone know if the input shaft can be replaced? As you can see in the pic, it's pretty bad. Thanks in advance for any guidance!!  |
|  |
 Today
| |
 Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
|
07-26-2014, 07:21 PM
| #2 |
| Gone Mad   Join Date: Oct 2009 Location: Buford, GA
Posts: 6,654
| Re: Imaginative MFG input shaft You don't need the whole differential. You can buy a new or used input shaft. Here's the manual: Dana Axle: http://www.buggiesgonewild.com/attac...5-28148g01.pdf |
| |
|
07-26-2014, 07:37 PM
| #3 |
| Gone Wild  Join Date: Sep 2012 Location: Savannah, GA
Posts: 2,760
| Re: Imaginative MFG input shaft Will the ezgo input shaft work with his 2-speed rear axle? |
|
| |
|
07-26-2014, 07:41 PM
| #4 |
| Not Yet Wild Join Date: Jun 2012
Posts: 14
| Re: Imaginative MFG input shaft That was my next question. I sent Imaginative an email to see if I can buy it from them. It looks like there's a rubber piece instead of a ring. Do you think I should pry that off to get it out? |
|
| |
|
07-26-2014, 07:56 PM
| #5 |
| Not Yet Wild Join Date: Jun 2012
Posts: 14
| Re: Imaginative MFG input shaft Man you guys are awesome!!!! Here's where I'm at because of your help. I'm down to the bearing. The shaft won't budge. I've read some say heat a little where others so that's bad. How would you suggest getting it out? |
|
| |
|
07-26-2014, 08:48 PM
| #6 |
| Gone Wild Join Date: Jan 2012 Location: Conway,Arkansas 72032
Posts: 757
| Re: Imaginative MFG input shaft set of vice grip pliers and a slide hammer. Can't hurt the shaft. |
|
| |
|
| Tags |
| differential, ezgo electric, input shaft |
| ||||||
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| input shaft | Gas Yamaha | |||
| g16 input shaft | Gas Yamaha | |||
| G2 Input shaft | Gas Yamaha | |||
| Input shaft | Electric EZGO | |||
| G16 input shaft | Gas Yamaha | |||
Linear Mode
