|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-26-2014, 10:13 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Location: SC
Posts: 16
|
Won't go in reverse
My 2000 TXT PDS has the F/R switch on the dash. Lately, it won't move when I put the switch in reverse. If I put it back in forward and move then back in reverse, it will go just fine. I don't smell anything burning. Is the switch going bad?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-26-2014, 11:47 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Won't go in reverse
Possibly - pull the switch plate and clean the 3 spade connections on the back. note the color and location of the 3 wires.
|
07-27-2014, 07:05 AM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Won't go in reverse
Depending on where you are in SC it could definitely be corrosion. Salt air? When you put it in R does the beeper sound? If no, probably the switch, yes maybe something else.
|
07-27-2014, 11:37 AM | #4 |
Not Yet Wild
Join Date: Jul 2014
Location: SC
Posts: 16
|
Re: Won't go in reverse
Beeper sounds. Like I said, if you move forward first, it will do fine in reverse.
|
07-27-2014, 12:24 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Won't go in reverse
Hmmm. If I understand your last post, the beeper sounds when it doesn't go? I'm no PDS expert, but if the reverse beeper is beeping, yet no reverse motion, does that rule out the FNR switch?
|
07-27-2014, 12:33 PM | #6 |
Not Yet Wild
Join Date: Jul 2014
Location: SC
Posts: 16
|
Re: Won't go in reverse
If F/R is ok, what is next the controller?
|
07-27-2014, 01:01 PM | #7 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Won't go in reverse
First answer the question I posed. If it only beeps when it's working, you can try reversing the forward and reverse wires on the FNR. Hopefully the problem will move to forward, which will say you have a bad FNR rocker switch.
|
07-27-2014, 01:36 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Won't go in reverse
If the beeper is sounding then I think the FnR switch is probably ok. That said, reversing the wires is a simple free test..
|
07-27-2014, 02:26 PM | #9 |
Not Yet Wild
Join Date: Jul 2014
Location: SC
Posts: 16
|
Re: Won't go in reverse
Beeper sounds every time in reverse. I don't hear the solenoid every time, but the beeper sounds every time.
|
07-27-2014, 04:39 PM | #10 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Won't go in reverse
If the beeper sounds, you've eliminated the F/R switch. Run/Tow switch, Key switch and Reed switch.
If the solenoid clicks every time the pedal is pushed in Forward, you've eliminated the pedal microswitch. If cart runs normally in Forward, you've eliminated the ITS. That leaves the controller and the motor. To eliminate the motor, switch the F1 & F2 leads on top of the controller. If the cart now runs backwards, you've eliminated the motor. ------------ Toss a Alltrax DCX400 into it and it'll do about 24 MPH at 36V on stock height tires. |
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
Reverse won't go but if I pump gas it slams into reverse | Electric Club Car | |||
Foward in reverse and reverse in forward | Electric Club Car | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO |