lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-06-2014, 12:53 PM   #11
Not Yet Wild
 
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
Default Re: cart no go with solenoid click

Finally got around to the cart today. Was no power at b- m- on controller. Found a broken wire and bad copper lug on wiper board. Was the very bottom wire. Going to replace the parts Monday and will update
birdleg is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-07-2014, 01:08 PM   #12
Gone Wild
 
mgray70's Avatar
E-Z-GO
 
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 1,589
Default

Wiper board?? On a 99??
mgray70 is offline   Reply With Quote
Unread 09-08-2014, 01:27 PM   #13
Not Yet Wild
 
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
Default Re: cart no go with solenoid click

The fnr thing under the small black cover. I dunno what it's technically called. Has 4 copper lugs and rotates with the fnr handle. Well the very bottom wire was broken and lug was burned. Replacing it today and hopefully that fixes it.
birdleg is offline   Reply With Quote
Unread 09-08-2014, 01:49 PM   #14
Gone Wild
 
mgray70's Avatar
E-Z-GO
 
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 1,589
Default

Maybe so. That is called the FNR switch. Wiper boards are usually on a resistor cart.
mgray70 is offline   Reply With Quote
Unread 09-08-2014, 03:00 PM   #15
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,345
Default Re: cart no go with solenoid click

Quote:
Originally Posted by birdleg View Post
The fnr thing under the small black cover. I dunno what it's technically called. Has 4 copper lugs and rotates with the fnr handle. Well the very bottom wire was broken and lug was burned. Replacing it today and hopefully that fixes it.
What you are describing is a rotary style for the reverse switch. They have been used in various styles from golf cart inception to present. This switch consists of two parts. There is the small rotating centerpiece and the larger housing. There are four lug contacts in each piece. High amperage cables connect to the four lugs in the housing. It is one of these lugs which you say got hot. When these lugs get hot they sink in the plastic housing. This compromises the lugs position and reduces contact with its counterpart.
Because the damage to the plastic housing is not repairable it is best to replace the switch with a heavy-duty model.
scottyb is offline   Reply With Quote
Unread 09-25-2014, 06:53 PM   #16
Not Yet Wild
 
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
Default Re: cart no go with solenoid click

Ok i found a broke wire on the fnr thing. Was the one on very bottom that goes to the controller. Fixed it and still nothing. Replaced the controller and the same thing. Solenoid click but no movement. I dunno where to go from here. Help please!!!
birdleg is offline   Reply With Quote
Unread 09-25-2014, 07:13 PM   #17
Gone Wild
E-Z-GO
 
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
Default Re: cart no go with solenoid click

Birdleg One of the first things I do, Is to make sure that all the wires going to the motor is good. There has been a lot of problems with the wiring rubbing the frame just behind the battery box. when they do they burn into. You may have already checked this, but had to asked.
sonnysmith is offline   Reply With Quote
Unread 09-25-2014, 07:24 PM   #18
Not Yet Wild
 
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
Default Re: cart no go with solenoid click

I have checked the motor wires. All look good. Also scottyb on b- and m- I still get no voltage really. Even on new controller
birdleg is offline   Reply With Quote
Unread 09-25-2014, 08:58 PM   #19
Gone Wild
 
mgray70's Avatar
E-Z-GO
 
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 1,589
Default

Have you actually checked the solenoid? Just because it clicks don't necessarily mean it works. Remove the pre charged resistor that is across the large terminals and then check for continuity after the solenoid engages. The contractors inside could be bad and not making contact.
mgray70 is offline   Reply With Quote
Unread 09-25-2014, 09:02 PM   #20
Not Yet Wild
 
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
Default Re: cart no go with solenoid click

I haven't checked it with a meter no. I will do that tomorrow when I can. Thx for the info
birdleg is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
DCS solenoid wont click cart stalls Electric EZGO
Mid 90's EZGO - No solenoid click - Cart won't accelerate Electric EZGO
'97 TXT series cart no go, solenoid won't click Electric EZGO
94 Ez go solenoid won't click--cart won't go Electric EZGO
First long distance run with cart, now solenoid doesn't click. Clone Engine Swaps


All times are GMT -5. The time now is 01:01 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.