|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-21-2014, 06:58 PM | #1 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Medalist wiring help needed
Picked up a 95 Medalist and I have the batteries all charged up. I turn the key and when pedal is depressed I can hear a click. When in reverse the buzzer works and I hear a click...but no go. I checked connections everywhere and found these two wires cut and cant figure out where they go. On the other end one(white) is connected to the solenoid and one(black) is connected to the controller. See pics... Any idea if these wires could be my issue?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2014, 07:12 PM | #2 |
Guest
Posts: n/a
|
Re: Medalist wiring help needed
i would check the micro switch at the pot meter
Last edited by crash test dummy; 09-21-2014 at 07:25 PM.. Reason: thought it said 85 |
09-21-2014, 07:22 PM | #3 |
Gone Wild
Join Date: Dec 2013
Location: Athens, Alabama
Posts: 758
|
Re: Medalist wiring help needed
Those are the original wires from the charge receptacle. It looks like someone changed them out for some larger cables. Charging receptacle, at least the underseat portion, has been changed also. On my 95, the black and white wires in your pic were connected exactly like yours at the controller and solenoid. Those two wires are not your problem. I would unhook the connected ends however.
|
09-21-2014, 07:25 PM | #4 |
Gone Wild
Join Date: Dec 2013
Location: Athens, Alabama
Posts: 758
|
Re: Medalist wiring help needed
deleted
|
09-21-2014, 07:29 PM | #5 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: Medalist wiring help needed
So where is the switch I need to check? Thanks for the help on the wires. I believe the go straight to the batteries now. Wonder if I should change it back?
|
09-21-2014, 07:34 PM | #6 |
Gone Wild
Join Date: Dec 2013
Location: Athens, Alabama
Posts: 758
|
Re: Medalist wiring help needed
No need to change it back as long as what is on there now is in good shape. The switch Crash is referring to is the switch on the throttle (ITS) under the floor mat behind (toward the seat) the throttle pedal enclosed in a black box.
|
09-21-2014, 07:41 PM | #7 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: Medalist wiring help needed
OK, I know exactly where that is. Any way to test or just replace and see if that fixes it? I took apart a medalist and have this left over. Is it the piece you are referring too?
|
09-21-2014, 07:44 PM | #8 |
Gone Wild
Join Date: Dec 2013
Location: Athens, Alabama
Posts: 758
|
Re: Medalist wiring help needed
My computer skills suck or I would give you the link to your wiring diagram. Look in the stickers and go to the last one by Ruredy and the first diagram you see is yours minus the charger lockout wires.
|
09-21-2014, 07:48 PM | #9 |
Gone Wild
Join Date: Dec 2013
Location: Athens, Alabama
Posts: 758
|
Re: Medalist wiring help needed
I'm sure someone can put you on to service manual to check the switch and also the ITS module that is also in that box.
|
09-21-2014, 08:03 PM | #10 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: Medalist wiring help needed
OK, thanks. I think the micro switch is only like 8 bucks so I will try that first. I found that diagram you mentioned. Thanks!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Medalist/TXT Gas Service Manual Needed | Gas EZGO | |||
EZGO Medalist wiring | Electric EZGO | |||
97 ezgo medalist wiring | Gas EZGO | |||
Wiring a 95 Medalist | Electric EZGO | |||
94 medalist wiring diagram | Electric EZGO |