lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-06-2008, 07:31 PM   #1
Not Yet Wild
E-Z-GO
 
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
Default Alltrax Dcx 400pds

Hi, I'm New To Carting.I Purchased A New ALLTRAX DCX 400PDS With The PDS Interface, For My 2006 Totally Stock EZ GO TXT PDS 36V Cart.I Received Manuals,Wiring Diagrams Etc.My Question Is How Does The Unit Itself Mount To The Cart? Will I Use The Four Existing Factory Holes That Currently Hold The Cover On? Thanks For Your Time.
eagle mtn is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-07-2008, 07:46 AM   #2
Gone Wild
 
Join Date: Dec 2007
Location: Central Florida
Posts: 320
Default Re: Alltrax Dcx 400pds

Yes. It will mount in the same place as the existing controller. Dependin on which controller you got - the stock cover may or may not fit back on.

Alltrax is VERY weather resistent though so I wouldn't worry too much.
Blue Chip is offline   Reply With Quote
Unread 11-07-2008, 09:04 AM   #3
Not Yet Wild
E-Z-GO
 
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
Default Re: Alltrax Dcx 400pds

Thanks BLUECHIP,The Unit Is Much Larger & Heavier Than I Imagined.It's Wider Than The Stock Controller Cover,So I Will More Than Likely Lose It.With The Economy In Decline I Was Able To Purchase A New DCX400PDS For Well Under $400. Just By Asking & The Company Programmed It To My Specs,Before Shipping It.Saving Me From Having To Do It.
eagle mtn is offline   Reply With Quote
Unread 11-07-2008, 02:56 PM   #4
Gone Wild
 
Otter70's Avatar
E-Z-GO
 
Join Date: Feb 2008
Location: Virginia Beach, Virginia
Posts: 234
Default Re: Alltrax Dcx 400pds

I just installed an alltrax 650 amp controller in my ezgo. It is 4 times larger that the stock one I just took out.

I took the plate that the controller mounts to out of the cart, removed the old controller and solenoid. laid my new controller on the plate, marked hole positions and drilled. I used 4 1/-20 bolts with aircraft nuts through bolted.

I moved the bracket that the old solenoid was mounted on, moved it down 1 inch, fabricated 3/4 inch spacer blocks out of some scrap square tubing to stand it further off the controller and through bolted.

Otter70 is offline   Reply With Quote
Unread 11-07-2008, 03:36 PM   #5
Not Yet Wild
 
Jibba's Avatar
E-Z-GO
 
Join Date: Oct 2008
Location: New Hampshire
Posts: 72
Default Re: Alltrax Dcx 400pds

Hey eagle , may I ask where you scored that???
Jibba is offline   Reply With Quote
Unread 11-07-2008, 06:09 PM   #6
Not Yet Wild
E-Z-GO
 
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
Default Re: Alltrax Dcx 400pds

Hi Jibba, Try Carl @ wwwevdrives.com Nice Guy, He'll Take Care Of You.Located In Oregon PST.
eagle mtn is offline   Reply With Quote
Unread 11-07-2008, 06:33 PM   #7
Not Yet Wild
E-Z-GO
 
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
Default Re: Alltrax Dcx 400pds

Hi Otter70 Thanks For The Info & Pic. I'll Tackle The Installation This Weekend.
eagle mtn is offline   Reply With Quote
Unread 11-07-2008, 06:49 PM   #8
Gone Wild
 
Otter70's Avatar
E-Z-GO
 
Join Date: Feb 2008
Location: Virginia Beach, Virginia
Posts: 234
Default Re: Alltrax Dcx 400pds

Good luck eagle

Jibba, I second the props for Carl at evdrives. I got my AXE 4865 from him. Top Rate
Otter70 is offline   Reply With Quote
Unread 11-10-2008, 07:52 AM   #9
Not Yet Wild
 
Jibba's Avatar
E-Z-GO
 
Join Date: Oct 2008
Location: New Hampshire
Posts: 72
Default Re: Alltrax Dcx 400pds

Thanks , we'll be getting a hold of Carl for sure.Seems like some decent prices.....
Jibba is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax AXE 4855 Electric EZGO
New Alltrax in a G19 Electric Yamaha
Alltrax Controller Golf Carts and Parts
EMP and Alltrax Combo Electric EZGO
Has anyone used a Alltrax in a G19 Electric Yamaha


All times are GMT -5. The time now is 07:21 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.