|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-06-2008, 07:31 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
|
Alltrax Dcx 400pds
Hi, I'm New To Carting.I Purchased A New ALLTRAX DCX 400PDS With The PDS Interface, For My 2006 Totally Stock EZ GO TXT PDS 36V Cart.I Received Manuals,Wiring Diagrams Etc.My Question Is How Does The Unit Itself Mount To The Cart? Will I Use The Four Existing Factory Holes That Currently Hold The Cover On? Thanks For Your Time.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-07-2008, 07:46 AM
|
#2 |
|
Gone Wild
Join Date: Dec 2007
Location: Central Florida
Posts: 320
|
Re: Alltrax Dcx 400pds
Yes. It will mount in the same place as the existing controller. Dependin on which controller you got - the stock cover may or may not fit back on.
Alltrax is VERY weather resistent though so I wouldn't worry too much. |
|
|
|
|
11-07-2008, 09:04 AM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
|
Re: Alltrax Dcx 400pds
Thanks BLUECHIP,The Unit Is Much Larger & Heavier Than I Imagined.It's Wider Than The Stock Controller Cover,So I Will More Than Likely Lose It.With The Economy In Decline I Was Able To Purchase A New DCX400PDS For Well Under $400. Just By Asking & The Company Programmed It To My Specs,Before Shipping It.Saving Me From Having To Do It.
|
|
|
|
|
11-07-2008, 02:56 PM
|
#4 |
|
Gone Wild
Join Date: Feb 2008
Location: Virginia Beach, Virginia
Posts: 234
|
Re: Alltrax Dcx 400pds
I just installed an alltrax 650 amp controller in my ezgo. It is 4 times larger that the stock one I just took out.
I took the plate that the controller mounts to out of the cart, removed the old controller and solenoid. laid my new controller on the plate, marked hole positions and drilled. I used 4 1/-20 bolts with aircraft nuts through bolted. I moved the bracket that the old solenoid was mounted on, moved it down 1 inch, fabricated 3/4 inch spacer blocks out of some scrap square tubing to stand it further off the controller and through bolted.  |
|
|
|
|
11-07-2008, 03:36 PM
|
#5 |
|
Not Yet Wild
Join Date: Oct 2008
Location: New Hampshire
Posts: 72
|
Re: Alltrax Dcx 400pds
Hey eagle , may I ask where you scored that???
|
|
|
|
|
11-07-2008, 06:09 PM
|
#6 |
|
Not Yet Wild
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
|
Re: Alltrax Dcx 400pds
Hi Jibba, Try Carl @ wwwevdrives.com Nice Guy, He'll Take Care Of You.Located In Oregon PST.
|
|
|
|
|
11-07-2008, 06:33 PM
|
#7 |
|
Not Yet Wild
Join Date: Nov 2008
Location: NW Georgia Mtns.
Posts: 20
|
Re: Alltrax Dcx 400pds
Hi Otter70 Thanks For The Info & Pic. I'll Tackle The Installation This Weekend.
|
|
|
|
|
11-07-2008, 06:49 PM
|
#8 |
|
Gone Wild
Join Date: Feb 2008
Location: Virginia Beach, Virginia
Posts: 234
|
Re: Alltrax Dcx 400pds
Good luck eagle
 Jibba, I second the props for Carl at evdrives. I got my AXE 4865 from him. Top Rate  |
|
|
|
|
11-10-2008, 07:52 AM
|
#9 |
|
Not Yet Wild
Join Date: Oct 2008
Location: New Hampshire
Posts: 72
|
Re: Alltrax Dcx 400pds
Thanks , we'll be getting a hold of Carl for sure.Seems like some decent prices.....
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax AXE 4855 | Electric EZGO | |||
| New Alltrax in a G19 | Electric Yamaha | |||
| Alltrax Controller | Golf Carts and Parts | |||
| EMP and Alltrax Combo | Electric EZGO | |||
| Has anyone used a Alltrax in a G19 | Electric Yamaha | |||
Linear Mode
