lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-07-2014, 09:38 AM   #1
Not Yet Wild
 
Join Date: Oct 2014
Posts: 8
Default 94 EZGO resistor cart electrical wiring

Hello

I have a 1994 EZGO Marathon with the coil resistor design, not solid state. The wiring diagram I have found for this cart doesn't show how to wire up the micro switch on the accelerator board. I'm talking about the micro switch that is on the same side of the board as the solenoid. There is also a small switch on the back side of the accelerator board with two wire tabs sticking out.
The cart I'm working on had the wiring taken out, I managed to get everything back into place except the wiring for the micro switches. When I push the accelerator the solenoid clicks but nothing happens. Batteries are charged and show 37 volts across the set. I have the back wheels off the ground as well and nothing.

Please help
Ramrod is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-07-2014, 09:45 AM   #2
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 63,801
Default Re: 94 EZGO resistor cart electrical wiring

Can you post the diagram you are using? I don't recall Ezgo making resistor coil carts in 1994, the cart may be a little older?
scottyb is offline   Reply With Quote
Unread 10-07-2014, 11:35 AM   #3
Not Yet Wild
 
Join Date: Oct 2014
Posts: 8
Default Re: 94 EZGO resistor cart electrical wiring

I looked up the serial number it said 94. It's a marathon not mentalist
Attached Images
File Type: jpg image.jpg (188.7 KB, 0 views)
Ramrod is offline   Reply With Quote
Unread 10-07-2014, 11:52 AM   #4
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 63,801
Default Re: 94 EZGO resistor cart electrical wiring

The year it was made is the last 2 digits in the manufacture code. All 94s were electronic speed control models. The micro switches are simple on/off switches for the solenoid activation and possibly a reverse buzzer.

Not sure how you have it wired. Solenoid is triggered by a micro switch on the speed wiper board. Sounds like you have that working..... problem may be in the high amperage side if the cart if the solenoid clicks and cart wont go. have you tested solenoid for continuity on the high amperage side (big posts) when it clicks?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
88 EZGO electric resistor cart resistor problem Electric EZGO
83 ezgo resistor cart wiring diagram Electric EZGO
EZGO resistor cart electrical issue Electric EZGO
EZGO Resistor cart wiring 1983 Fairway Villager Electric EZGO
EZGO Resistor cart wiring Electric EZGO


All times are GMT -5. The time now is 05:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.