|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
01-16-2019, 10:00 PM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 4
|
Upgrading rxv 2015
I’m going to upgrade a 2015 stock rxv. Curious what would be a good lift rim and tire size as well as back seat. Obviously I’m trying to come out cheap as possible cause were just gona run it up and down paths but any info is greatly appreciated?!?!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2019, 10:23 PM | #2 |
Wild Gone
Join Date: Oct 2016
Location: Davie, FL
Posts: 633
|
Re: Upgrading rxv 2015
The madjax A-arm lift is pretty good, but my only complaint is the turning radius sucks. I like that its not too wide. A couple other kits I looked at put the wheels a good 6" further out on either side.
I went with the Genesis 250 rear seat. I liked the cup holders built into the arm rests, lighter than steel and less likely to rust, and the rear step can fold up. Only complaint is that it sits a little high. The seat frame is thicker than the steel kits and also does not mount as close to the rear body. I put on a set of 12" wheels with 22" turf tire. Running at 30+mph, I wanted a smoother quieter ride than the 23 all terrain tires that are pretty common. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Upgrading from 36v to 48v | Electric EZGO | |||
Upgrading my EZ-GO - | Electric EZGO | |||
Upgrading | Electric Club Car | |||
Upgrading | Electric EZGO | |||
upgrading to 72v | Extreme DC! |