|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-18-2015, 04:13 PM | #1 |
Getting Wild
Join Date: Oct 2014
Posts: 129
|
How to change the ignition? key is jammed
I have an older yamaha electric cart, when I put the key in and turn, it just keeps spinning and I have to mess with it for 5 minutes of pressing hard until it will actually turn on.
What do I need to purchase so that a new key and ignition will work? Is it hard to install? or just splice the current wires and stick the new one in? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-18-2015, 04:24 PM | #2 |
Getting Wild
Join Date: Oct 2014
Posts: 129
|
Re: How to change the ignition? key is jammed
http://www.everythingcarts.com/p-908...0-g21-g22.aspx
I believe that is what I need. It looks like my current one. However I am not sure hot to get it out? It just keeps spinning all the way left or right, whats the trick to getting it out? Perhaps the current one is fine, just is not attached to the dash correctly? |
02-18-2015, 04:49 PM | #3 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: How to change the ignition? key is jammed
Make sure its not the complete switch turning inside the dash. There is a plastic lock nut that can get loose. If its the key spinning inside then just order the replacement switch. Loosen the lock nut, unplug at the harness and reinstall. Very easy.
|
02-18-2015, 04:54 PM | #4 |
Getting Wild
Join Date: Oct 2014
Posts: 129
|
Re: How to change the ignition? key is jammed
The entire assembly seems to be spinning inside the dash. Not just the key. with the key inserted and I turn, the entire things keeps turning. How do I secure it?
Where is this lock nut? |
02-18-2015, 04:59 PM | #5 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: How to change the ignition? key is jammed
The link you posted above the lock nut is the 8 sided piece right where the key inserts.
|
02-18-2015, 05:01 PM | #6 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: How to change the ignition? key is jammed
You will need to get to the back side of the switch and hold it tight while tightening the lock nut.
|
02-18-2015, 05:02 PM | #7 |
Getting Wild
Join Date: Oct 2014
Posts: 129
|
Re: How to change the ignition? key is jammed
that is the part that is sticking out of the dash that continues to spin in circles. So it will not losen or tighted. Does that make sense?
|
02-18-2015, 05:09 PM | #8 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: How to change the ignition? key is jammed
Sounds like the plastic lock nut is cross threaded onto the plastic threaded shaft on the ign ition switch.
|
02-18-2015, 05:35 PM | #9 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: How to change the ignition? key is jammed
Post a pic of your dash/keyswitch with key removed?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Pre MCI ignition and MCI ignition parts compatibility | Gas EZGO | |||
G-14 need ignition help | Gas Yamaha | |||
WTB EZ GO Ignition and key | Golf Carts and Parts | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
How to change out the ignition switch? | Gas EZGO |