|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-21-2016, 06:30 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Location: Simpsonville SC
Posts: 4
|
allrax dcx300 performance
I have a non lifted 2003 yamaha g22 with stock GE motor and control unit as well as stock solenoid. My batteries are 2 months old. The cart is brutally slow (14mph) so i ordered a altrax dcx300 controller and it should be arriving in the next few days. I was wondering what kind of results (speed) i can expect to get after the installation of the new controller. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-21-2016, 08:55 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: allrax dcx300 performance
I would imagine 22-24 mph on the flats with some slowing on the hills.
|
02-22-2016, 09:22 AM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: allrax dcx300 performance
|
02-22-2016, 10:15 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: allrax dcx300 performance
|
02-23-2016, 03:26 PM | #5 |
Gone Wild
Join Date: Oct 2014
Posts: 173
|
Re: allrax dcx300 performance
I have the new XCT 300 and motor is stock Hitachi with Plum Quick Bandit upgrade. Top speed is 22-24 and much more torque
|
02-24-2016, 01:50 AM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: allrax dcx300 performance
|
02-24-2016, 03:51 PM | #7 |
Gone Wild
Join Date: Oct 2014
Posts: 173
|
Re: allrax dcx300 performance
|
02-26-2016, 11:06 AM | #8 |
Not Yet Wild
Join Date: Feb 2016
Location: Simpsonville SC
Posts: 4
|
Re: allrax dcx300 performance
Alright so I got the new controller in and it runs about 23mph which is great. I've hit a few snags during the instal though. The controller is for a g19 and only provide instructions on installing it into a g19. In the directions they want you to splice into the red/white wire off the solenoid and run it directly into the red/white wire in the harness this step I did without issue but the carts acceleration is choppy and I have to pump the gas pedal to feel like the motor is engaging. Another step on the directions told me to find an 18g red wire coming from "the charge port" snip it put a ring terminal on it and hook it directly into the b+ terminal on the solenoid....? I can't find this wire anywhere on a g22. Does anyone have any idea if this wire exists on the g22?..... Also any thoughts on the choppy acceleration? Thanks
|
02-26-2016, 11:26 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: allrax dcx300 performance
Call Alltrax tech support 541-476-3565 and let us know what the answer is.
|
02-26-2016, 03:09 PM | #10 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: allrax dcx300 performance
That mod is totally un-needed on G22.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
DCX300 dead after "tow" with switch in "run". | Electric EZGO | |||
Alltrax NCX300 vs DCX300 controller | Electric Club Car | |||
36v vs 48v performance | Electric EZGO | |||
Performance | Gas EZGO | |||
Open field error with alltrax dcx300 on a 1996 or 1997 dcs | Electric EZGO |