|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-26-2016, 03:19 PM
|
#1 |
|
Gone Wild
Join Date: Mar 2016
Posts: 264
|
Ydre xct500 install no movement or buzzer
We just installed everything, and it's a brick... Ideas?
   Sent from my iPhone using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-26-2016, 03:59 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Ydre xct500 install no movement or buzzer
The diode is backwards and (luckily) the small wire with the big ring goes on the big post with the battery main cable. Had the small wire with big ring been installed correctly real damage could have been done by the backwards diode.
Pay attention to the install diagram on page 20 of the owners manual |
|
|
|
|
06-26-2016, 05:53 PM
|
#3 |
|
Gone Wild
Join Date: Mar 2016
Posts: 264
|
We copied the original layout to this one. We reversed the little wires and moved the run / tow to the top and it works perfectly. 25mph
Sent from my iPhone using Tapatalk |
|
|
|
|
06-26-2016, 06:32 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Ydre xct500 install no movement or buzzer
Phew ! You kinda dodged a bullet there with that big ring wire,
Had that solenoid activated something would have burnt. 25 mph is good  |
|
|
|
|
06-26-2016, 07:53 PM
|
#5 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,165
|
Re: Ydre xct500 install no movement or buzzer
Your original could not have been wired that way.
|
|
|
|
|
06-26-2016, 08:30 PM
|
#6 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Ydre xct500 install no movement or buzzer
Quote:
 |
|
|
|
|
|
06-26-2016, 10:05 PM
|
#7 |
|
Gone Wild
Join Date: Jan 2014
Location: Okatie, SC
Posts: 310
|
Re: Ydre xct500 install no movement or buzzer
scottyb, are those your cables in the pictures??
|
|
|
|
|
06-26-2016, 10:17 PM
|
#8 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Ydre xct500 install no movement or buzzer
Quote:
And here > http://www.cartsunlimited.net/battery-cable-sets.html |
|
|
|
|
|
06-27-2016, 07:15 AM
|
#9 |
|
Gone Wild
Join Date: Mar 2016
Posts: 264
|
Is a solenoid directional? What I mean by that is the top of it was labeled A1 A2 (not to be confused with the motor). We hooked everything up right to left for ease of install... Meaning positive feed from pack & Run/tow on the right side and left went to controller...
I ask because my install on a club car will be opposite layout for ease of install. Sent from my iPhone using Tapatalk |
|
|
|
|
06-27-2016, 07:24 AM
|
#10 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Ydre xct500 install no movement or buzzer
The big brown topped MZJ400 is non- directional. Most solenoids used in golf carts are non directional unless marked otherwise.
The exception would be an SW180 with magnetic blow outs. This solenoid is clearly marked + on one large terminal. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax XCT500 Install on 2011 Club Car DS IQ | Electric Club Car | |||
| Alltrax xct500 install help | Electric Club Car | |||
| Xct500 | Electric EZGO | |||
| Reverse buzzer install after controller conversion | Electric Club Car | |||
| 2007 ydre | Electric Yamaha | |||
Linear Mode
