lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-26-2016, 03:19 PM   #1
Gone Wild
 
Join Date: Mar 2016
Posts: 264
Default Ydre xct500 install no movement or buzzer

We just installed everything, and it's a brick... Ideas?




Sent from my iPhone using Tapatalk
Patela2oh is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-26-2016, 03:59 PM   #2
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,436
Default Re: Ydre xct500 install no movement or buzzer

The diode is backwards and (luckily) the small wire with the big ring goes on the big post with the battery main cable. Had the small wire with big ring been installed correctly real damage could have been done by the backwards diode.

Pay attention to the install diagram on page 20 of the owners manual
scottyb is offline   Reply With Quote
Unread 06-26-2016, 05:53 PM   #3
Gone Wild
 
Join Date: Mar 2016
Posts: 264
Default

We copied the original layout to this one. We reversed the little wires and moved the run / tow to the top and it works perfectly. 25mph


Sent from my iPhone using Tapatalk
Patela2oh is offline   Reply With Quote
Unread 06-26-2016, 06:32 PM   #4
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,436
Default Re: Ydre xct500 install no movement or buzzer

Phew ! You kinda dodged a bullet there with that big ring wire,
Had that solenoid activated something would have burnt.

25 mph is good
scottyb is offline   Reply With Quote
Unread 06-26-2016, 07:53 PM   #5
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 2,901
Default Re: Ydre xct500 install no movement or buzzer

Your original could not have been wired that way.
Volt_Ampere is offline   Reply With Quote
Unread 06-26-2016, 08:30 PM   #6
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,436
Default Re: Ydre xct500 install no movement or buzzer

Quote:
Originally Posted by Volt_Ampere View Post
Your original could not have been wired that way.
It wasn't
scottyb is offline   Reply With Quote
Unread 06-26-2016, 10:05 PM   #7
Gone Wild
Club Car
 
Join Date: Jan 2014
Location: Okatie, SC
Posts: 308
Default Re: Ydre xct500 install no movement or buzzer

scottyb, are those your cables in the pictures??
Hecky50 is offline   Reply With Quote
Unread 06-26-2016, 10:17 PM   #8
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,436
Default Re: Ydre xct500 install no movement or buzzer

Quote:
Originally Posted by Hecky50 View Post
scottyb, are those your cables in the pictures??
Yes they are And here > http://www.cartsunlimited.net/battery-cable-sets.html
Attached Images
File Type: jpg cable 2.jpg (68.0 KB, 0 views)
File Type: jpg IMG_1435.JPG (389.0 KB, 0 views)
scottyb is offline   Reply With Quote
Unread 06-27-2016, 07:15 AM   #9
Gone Wild
 
Join Date: Mar 2016
Posts: 264
Default

Is a solenoid directional? What I mean by that is the top of it was labeled A1 A2 (not to be confused with the motor). We hooked everything up right to left for ease of install... Meaning positive feed from pack & Run/tow on the right side and left went to controller...

I ask because my install on a club car will be opposite layout for ease of install.


Sent from my iPhone using Tapatalk
Patela2oh is offline   Reply With Quote
Unread 06-27-2016, 07:24 AM   #10
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 68,436
Default Re: Ydre xct500 install no movement or buzzer

The big brown topped MZJ400 is non- directional. Most solenoids used in golf carts are non directional unless marked otherwise.

The exception would be an SW180 with magnetic blow outs. This solenoid is clearly marked + on one large terminal.
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax XCT500 Install on 2011 Club Car DS IQ Electric Club Car
Alltrax xct500 install help Electric Club Car
Xct500 Electric EZGO
Reverse buzzer install after controller conversion Electric Club Car
2007 ydre Electric Yamaha


All times are GMT -5. The time now is 08:56 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.