|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-26-2016, 12:53 PM | #1 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Alltrax update for ydre?
So I see there are alltrax updates for other cart makes and people are reporting significant improvements. Do any of these udpates apply to Yamaha Drive? XCT 400 here. Thanks..
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2016, 01:30 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Alltrax update for ydre?
Yes - I apologize to our Yamaha friends, these updates apply across the board.
Plug your XCT usb cable in while on line and you will be prompted to install program updates. |
09-26-2016, 02:28 PM | #3 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Alltrax update for ydre?
Awesome thank you ScottyB. So you programmed the controller for me and loaded the map the motor builder sent. Will I need to adjust the map or anything else for better performance? If so I'll have no idea what to adjust w/the mapping. Thanks for all..
|
09-26-2016, 02:42 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Alltrax update for ydre?
If you have a map specific to your motor you should contact Alltrax by email to see if there is a map update. Motor specific map updates load in the dealer software.
|
09-28-2016, 07:25 PM | #5 |
Gone Wild
Join Date: May 2016
Location: California
Posts: 210
|
Re: Alltrax update for ydre?
So i contacted Alltrax after i installed the update regarding a new map update. I originally got a high speed motor from Electrical Motor Products, and they provided me the field map E57107-2. Scottyb programmed the controller for me prior to ship. After i received it and installed it, I sent my motor to another company where the armature was replaced and banded. The shop was very familiar with Alltrax controllers, and they told me to max the RPM limit all the way to 8k, which I did. He said he built the motor to work with the existing field map. I currently get approx 25-26 mph on flat. In Alltrax's response today, they said they need "the efficiency curve from the manufacturer." I'm new here, but I'm thinking there might be another map which would improve performance/efficiency with the new update installed. If I can't get the efficiency curve, am I stuck? Any direction is greatly appreciated.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax programming 2010 ydre | Electric Yamaha | |||
Alltrax xct 4800 or 48500 2010 ydre | Electric Yamaha | |||
Alltrax XCT48300 For Sale (YDRE) | Golf Carts and Parts | |||
Alltrax XCT48500 YDRE | Announcements | |||
Do Alltrax controllers work with newer model YDRE carts? | Electric Yamaha |