|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-27-2017, 07:49 AM | #1 |
Getting Wild
Join Date: Apr 2017
Posts: 116
|
Installed new solenoid issue
I installed a new Solenoid for my YDRE cart. Unfortunately, I cannot remember where this red wire goes....
In the picture, there is the red and black wire coming out of the plastic connector, i know those go on the small towers....but that single red one by itself, I didn't even see it when i took it apart and I do not know where it goes now. (Circled in red) I do not want to blow my new solenoid because i guessed where it went...lol Can anyone tell me where to put it? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-27-2017, 08:58 AM | #2 |
Gone Wild
Join Date: Mar 2016
Location: Sarasota, Florida
Posts: 387
|
Re: Installed new
where does the other end of that red wire go ?
What yr cart ? I'm sure there is schematic we can find to help you locate the wire :) |
06-27-2017, 09:46 AM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Installed new
On the large terminal from the batteries.
|
06-27-2017, 06:25 PM | #4 |
Getting Wild
Join Date: Apr 2017
Posts: 116
|
Re: Installed new
2008 YDRE - I tried looking for schematics, but no help. I took another picture of it. I cannot tell when it goes due to it being wrapped in protective plastic. It is not long enough to reach the solenoid AND go to a battery terminal. I'm stuck...Maybe it was never connected? IDK....
|
06-27-2017, 06:26 PM | #5 |
Getting Wild
Join Date: Apr 2017
Posts: 116
|
Re: Installed new
|
06-28-2017, 08:12 AM | #6 |
Getting Wild
Join Date: Apr 2017
Posts: 116
|
Re: Installed new
Bump.....anyone with a 2008 ydre take a look at their and let me know? Pplllleeeaaasseeeee... .
|
06-28-2017, 08:24 AM | #7 |
Gone Wild
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
|
Re: Installed new
yes, that is what cgtech meant. On the large positive terminal of the solenoid which is connected directly to the battery. This wire feeds the Tow/Run switch. See attached YDRE wiring diagram.
Last edited by PingEye3; 06-28-2017 at 08:28 AM.. Reason: add attachment |
06-28-2017, 09:18 AM | #8 |
Getting Wild
Join Date: Apr 2017
Posts: 116
|
Re: Installed new
Just making sure I got it right. Can't post a pic through my phone. But the positive wire on the large teminal goes to a silver metal box with a large + and - on it., not to a battery. Just confirming that we are on the same page still?
Thanks! |
06-28-2017, 10:03 AM | #9 |
Gone Wild
Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
|
Re: Installed new
I think we need a pic of that. I have no experience with Yamaha but...
A large metal box sounds like a voltage reducer. But why would a large 6awg or bigger wire go from the solenoid to the reducer? Does a 6awg go from the so called reducer to the battery also? It would have to or something is not making sense. I guess it could be wired that way. It would seem that the unknown red wire in question with large ring terminal does go to the run/tow switch circuit as others have stated and is in the schematic. Schematic does not show a voltage reducer but that is probably and add on. |
06-28-2017, 10:58 AM | #10 |
Gone Wild
Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
|
Re: Installed new
Maybe the moderators can update this thread title to "Installed new solenoid".
"Installed new" is very open ended... They have amazing power! |
Tags |
solenoid |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Solenoid issue | Electric Yamaha | |||
01 TXT w PDS 3-2 code after new solenoid installed | Electric EZGO | |||
Need Help, just installed new controller and solenoid | Electric EZGO | |||
Installed controller and solenoid now it won't charge | Electric Club Car | |||
Solenoid Issue | Gas Harley Davidson |