Solenoid upgrade install question

CoryN

I have a 2007 YDRE. It tops out at 10.2 mph. I talked with Scotty B and ordered the Alltrax controller and upgraded solenoid. I'm up at the lake installing this tonight. Have the controller installed and all buttoned up but I'm stuck on the solinoid. The stock one had two big terminals and two small terminals. There was a big red and big black and small red on the two big terminals and a small black and small red on the little terminals. How do I hook up the new solinoid that only has two big terminals?

Thanks in advance

Cory

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

Can you be specific.
Are you asking about the SW180 solenoid?

Attached Images

SW180 1pg.jpg (126.7 KB, 0 views)

CoryN

Yes, that's the one.

CoryN

[IMG][/IMG]So is this indicating that I put the small wires on the spade terminals then?

scottyb

From my email response:

The small red was on the the big terminal with the cable that connected to the battery pack (+) this cable and small red wire will got to the SW180 big terminal marked (+).
The small red wire will go to the small terminal marked (+)
The small black wire will go to the small terminal marked (-)

CoryN

Thanks. Doubled my speed from 10.2 to 20.6 mph

scottyb

That's nice

jdavila99999

Awesome


Sent from my iPhone using Tapatalk