|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-17-2018, 07:34 PM | #1 |
Not Yet Wild
Join Date: Sep 2017
Posts: 20
|
Thunderbull charger transfromer thermal fuse
I'm working on 2 thunderbull 48V chargers. I found that the primary winding (120VAC side) on both transformers have no continuity. I took one of the transformers out of the charger and poked around a little bit (cutting into the black plastic/paper covering that hides the windings) to find the "disconnect" is where a fuse is. According to a diagram that a local golf cart shop gave me, there should be a 135C thermal fuse in line with the primary winding (between the board and the transformer). I'm pretty sure it's this fuse. Anyone know where I could find a replacement fuse. I know (according to the diagram) it should be rated for 135C but I don't know the amperage rating. Any info would be helpful. There are no markings on the fuse (or at least are unlegible).
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Thunderbull 48v charger | Electric Club Car | |||
Thunderbull VDC Charger & 09 RXV cart | Electric EZGO | |||
Will a Thunderbull charger work on a EZ-GO RXV cart? | Electric EZGO | |||
thunderbull charger | Electric Club Car | |||
Thunderbull charger for 48V conversion? | Electric EZGO |