|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-09-2019, 02:10 PM | #1 |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
New FSIP motor - have a problem
Today, Me and a buddy finally got around to installing the FSIP #122-48VTORQUEY motor that he ordered from ScottyB a few months ago. 2014 G29 cart with stock controller. We had to splice the speed sensor into the old plug so that it would plug into the cart. When we ran it, reverse/forward is backwards according to the F/R switch. It's slow when moving forward(which is reverse on the switch) and is really fast in reverse(Forward on the switch). What did I do wrong? Thanks for the help!
IMG_0962.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2019, 02:11 PM | #2 |
Gone Wild
Join Date: Oct 2017
Location: Harrisburg, PA
Posts: 380
|
Re: New FSIP motor - have a problem
You switched the F1 and F2 leads going to the motor (thick wires). I believe. Someone correct me if I'm wrong.
Sent from my iPhone using Tapatalk |
05-09-2019, 02:12 PM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: New FSIP motor - have a problem
|
05-09-2019, 02:18 PM | #4 |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: New FSIP motor - have a problem
I didn’t switch the leads on the motor. They were all labeled and I put them on accordingly. Do you think I can switch them? I was thinking about that but Wasn’t sure if it would hurt anything
|
05-09-2019, 02:27 PM | #5 |
Gone Wild
Join Date: Oct 2017
Location: Harrisburg, PA
Posts: 380
|
Re: New FSIP motor - have a problem
Yes it will be fine. It will just cause it to run opposite of what it does now, which is the opposite of normal. Lol
Sent from my iPhone using Tapatalk |
05-09-2019, 02:28 PM | #6 |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: New FSIP motor - have a problem
Awesome. I’ll try that. Thanks
|
05-09-2019, 03:14 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: New FSIP motor - have a problem
Is the speed sensor working?
The wire colors matched on the plug don't look right, Ie: red to black. |
05-09-2019, 03:20 PM | #8 |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: New FSIP motor - have a problem
|
05-09-2019, 03:29 PM | #9 | |
Gone Wild
Join Date: Oct 2017
Location: Harrisburg, PA
Posts: 380
|
Re: New FSIP motor - have a problem
Quote:
I would match the two matching wires and then the third one is the third one. If you leave it fully unplugged you just won't have regen braking I.e. slowing on downhill grades when off both the gas and brake Sent from my iPhone using Tapatalk |
|
05-09-2019, 03:31 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: New FSIP motor - have a problem
The speed sensor connection should be red to red, blk to blk, 2 odd colors together.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
FSIP torque motor came today | Electric Club Car | |||
After FSIP motor break in | Electric Club Car | |||
Has anyone installed the new FSIP speed motor? | Electric Club Car | |||
FSIP speed motor install TXT48 | Electric EZGO | |||
FSIP SX Motor Controller EZGO PDS | Golf Carts and Parts |