|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-31-2010, 10:11 PM | #1 |
Not Yet Wild
Join Date: Nov 2009
Location: St. Louis, MO
Posts: 53
|
G1 Motor upgrade
I have stripped my G1 and starting to paint it I am wondering if there are some motor upgrade available for this cart. At my work we have several older motors from forklifts and other random vehicles that we pulled before we scrapped the bodies. Would any of these be worth looking into. What are my options with this cart to make it FAST. I have a guy who will give me a snow mobile motors that runs but hear that is a pain and costly. Let me know what my options are, thanks and have to say this forum is awesome.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-01-2010, 07:22 AM | #2 |
Gone Wild
Join Date: Sep 2009
Location: I live in Kings Mountain, N.C.
Posts: 358
|
Re: G1 Motor upgrade
Is it gas or electric?
|
04-01-2010, 08:58 AM | #3 |
Not Yet Wild
Join Date: Nov 2009
Location: St. Louis, MO
Posts: 53
|
Re: G1 Motor upgrade
ELectric
|
04-01-2010, 02:39 PM | #4 |
Gone Wild
Join Date: Sep 2009
Location: I live in Kings Mountain, N.C.
Posts: 358
|
Re: G1 Motor upgrade
Take your old motor out and send it to Plum Quick. They will do a number on your old one and it'll cost 'ya about $225. Go to <plumquick.com> and get the phone numbers. Good luck!!
|
04-01-2010, 05:44 PM | #5 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 Motor upgrade
Quote:
|
|
05-11-2010, 07:58 AM | #6 |
Not Yet Wild
Join Date: May 2010
Posts: 19
|
Re: G1 Motor upgrade
You dont need a different different rear end, I took the electric motor off and found a 3 inch pulley that fit on the 3/4 inch shaft and then I stretched the swing arm 18 inches with 2 inch exhaust pipe tubing and attached it to the next crossmember up in the center of the cart to have more room for the engine,I only have a 9 hp. Honda,I had to experiment with different size pulleys to get the torque and speed combination, I have seen 4 cyl motorcycle engines in these G1s that have a 8 inch sproket in place of the transaxel but use the stock axel tubes.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
98 Ez GO TXT DCS Motor Upgrade | Design Center | |||
PDS upgrade D&D motor ,controller help | Electric EZGO | |||
Motor Upgrade Sugestions | Electric EZGO | |||
EMP motor upgrade | Electric Club Car | |||
Motor and controller upgrade | Electric Club Car |