90-91 yamaha resistor coil

stevensherrer

I have a 90-91 yamaha G1 or G2. i just got it. the resistor coil is broke. it is broke at the loop where the bolt goes through. can i rebend a new loop or does it need a new coil all together.thanks steven

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

smallblock450sl

I would try the the rebend you mentioned or even an eye end connector (if you can fasten it very well). Guess it depends witch loop broke.

stevensherrer

It broke at the very end. Where could you find the board that the resistor attaches to.

trkbilder

If you plan on driving it real slow you can expect this to happen again and again. I changed mine over to solid state(I'm still working on it!) so I can cruise at the beach at about 3-5 mph for extended periods of time. If you can afford it, this is the way to go.

stevensherrer

What all would a have to do to convert it to solid state.

trkbilder

First, rip out all the resistor coil stuff. You will need a controller, a solenoid, a pot box, and a new set of #4 gauge wires. The brkt. on the Yamaha is a good mounting platform for all this stuff. I'm using a Curtis controller, 1204, the stock solenoid(I'm staying at 36 volts.) and a PB-6 potbox. I've looked at so many schematics that I can't read small print anymore but it is going to be worth it in the end.

stevensherrer

Anyone know where I can get a used coil for a g1.