|
|||||||
| Notices | |
|
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | |
|
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
03-31-2008, 02:28 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2007
Posts: 3
|
New Alltrax in a G19
Last fall I bought a DCX300 for my g19, I finally got around to installing it
recently, I noticed the cart stops when the voltage drops to around 40 volts under load. My stock GE controller still would run even in the upper 20s. Ive downloaded the software and will be attempting to make adjustments so has anyone had any experience using the controller pro software? |
|
|
|
|
|
|
04-02-2008, 08:48 PM
|
#2 |
|
GhEtTo PrAnKsTeR
Join Date: Jun 2007
Location: Kaufman, Texas
Posts: 3,016
|
Re: New Alltrax in a G19
The software works great. Once you set it up you will probly not use it again though. You are correct....there is a setting within the software to shut down at a certain voltage that is user set. I'm guessing they may have set it up for a 48 volt cart and you are using 36 volts? Running the batteries down that low will hurt them so be careful how low you take it.
|
|
Golf Cars | Lifted Golf Carts | Electric Golf Carts
Custom EZGO | B&S V-Twin | All Sports Long Travel Lift | 8:1 Gears | 22" Titan AT489's  | |  |  |  |  |  | 
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax Controller | Golf Carts and Parts | |||
| EMP and Alltrax Combo | Electric EZGO | |||
| Has anyone used a Alltrax in a G19 | Electric Yamaha | |||
| tungpo's 2001 cc 650 alltrax | Electric Club Car | |||
Linear Mode
