Need HELP......

Caltoon · 06-08-2008, 02:08 PM

Hi I'm new to the golf cart thing, I just picked up a 1998 yamaha cart and it was working fine until I fixed it.
I installed lights and cleaned all the battery terminels and when I put it back together I crossed the last terminal on the last battery. I guess I burned somthing out. I pulled the motor and cleaned the armiture and brushes still wont go top speed, I even tried my buddys motor and still the same. SO THEN I thought I could try the motor directly off the batterys by using a set of jumper cables now I have to push it to the shed it wont move at all. I can here the selonoid clicking but there is no power going back to the motor wires,I checked the in line 10 amp fuse and thats ok i dont have a clue what else to do (Please help I need it for camping next weak)
THANKS

Caltoon · 06-09-2008, 08:54 PM

Well I tryed it again. and I am makeing progress, I was able to get the motor to spin by connecting the s1 and s2 with a jumper and then connecting the
a1 and a2 with a set of battery cables going directly to the + and - off 36 volts of the battery.
But it still will not power up if I re connect it and try the gas peddle
I can here the selonid pick up but thats all that happens. any help would be greatly apprecieated. Thanks.... Rich

roady89 · 06-09-2008, 09:10 PM

Welcome to BGW

PLEASE DO NOT HOOK THE MOTOR UP THAT WAY!!! You will burn it up.
Use this to test your motor. http://www.empinc.biz/tech_support.p...troller_series

What make, model cart do you have. I will try and find you a wiring diagram.

roady89 · 06-09-2008, 09:15 PM

Is it a 1998 G16E?

Caltoon · 06-09-2008, 09:15 PM

Thanks for the reply. That was a one shot deal...... I figured i had already burned it up anyway. I was supprised to see it spin, I thing i burnt up the controller though thanks for the wireing diagram..

roady89 · 06-09-2008, 09:18 PM

Did anything spark beside the last connection? You may be fine...you just have battery cables wired wrong.

Caltoon · 06-09-2008, 09:19 PM

Yes 1998 g16 I don't Know about (E) I guess that stands for electric

Caltoon · 06-09-2008, 09:21 PM

I don't think so I checked it over and over, Thats where I went wrong in the beginning. in a hurry not paying attention

Caltoon · 06-09-2008, 09:25 PM

Like I said I can here the selonoid picking. but thats all that happens

Caltoon · 06-09-2008, 09:31 PM

I wish I had that diagram before
Thanks alot Roady89

06-08-2008, 02:08 PM	#1
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Need HELP...... Hi I'm new to the golf cart thing, I just picked up a 1998 yamaha cart and it was working fine until I fixed it. I installed lights and cleaned all the battery terminels and when I put it back together I crossed the last terminal on the last battery. I guess I burned somthing out. I pulled the motor and cleaned the armiture and brushes still wont go top speed, I even tried my buddys motor and still the same. SO THEN I thought I could try the motor directly off the batterys by using a set of jumper cables now I have to push it to the shed it wont move at all. I can here the selonoid clicking but there is no power going back to the motor wires,I checked the in line 10 amp fuse and thats ok i dont have a clue what else to do (Please help I need it for camping next weak) THANKS

06-09-2008, 08:54 PM	#2
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Re: Need HELP...... Well I tryed it again. and I am makeing progress, I was able to get the motor to spin by connecting the s1 and s2 with a jumper and then connecting the a1 and a2 with a set of battery cables going directly to the + and - off 36 volts of the battery. But it still will not power up if I re connect it and try the gas peddle I can here the selonid pick up but thats all that happens. any help would be greatly apprecieated. Thanks.... Rich

06-09-2008, 09:10 PM	#3
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,444	Re: Need HELP...... Welcome to BGW PLEASE DO NOT HOOK THE MOTOR UP THAT WAY!!! You will burn it up. Use this to test your motor. http://www.empinc.biz/tech_support.p...troller_series What make, model cart do you have. I will try and find you a wiring diagram.
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

06-09-2008, 09:15 PM	#4
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,444	Re: Need HELP...... Is it a 1998 G16E?
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

06-09-2008, 09:15 PM	#5
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Re: Need HELP...... Thanks for the reply. That was a one shot deal...... I figured i had already burned it up anyway. I was supprised to see it spin, I thing i burnt up the controller though thanks for the wireing diagram..

06-09-2008, 09:18 PM	#6
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,444	Re: Need HELP...... Did anything spark beside the last connection? You may be fine...you just have battery cables wired wrong.
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

06-09-2008, 09:19 PM	#7
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Re: Need HELP...... Yes 1998 g16 I don't Know about (E) I guess that stands for electric

06-09-2008, 09:21 PM	#8
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Re: Need HELP...... I don't think so I checked it over and over, Thats where I went wrong in the beginning. in a hurry not paying attention

06-09-2008, 09:25 PM	#9
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Re: Need HELP...... Like I said I can here the selonoid picking. but thats all that happens

06-09-2008, 09:31 PM	#10
Caltoon Not Yet Wild Join Date: Jun 2008 Location: Brick NJ Posts: 9	Re: Need HELP...... I wish I had that diagram before Thanks alot Roady89

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode