|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-21-2012, 04:30 PM
|
#1 |
|
Gone Crazy
 Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
92 G9 pinched motor wire
I got a friends electric G9 that they were driving one day with two on the back, it stopped running and he found they had pinched one of the controller to motor cables between the motor and frame.
It hasn't run since and what I know about electric carts I can hold in my hand. Did I fry a controller or can someone point me to some things to test? Thanks, Mitch |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-23-2012, 05:04 PM
|
#2 |
|
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 92 G9 pinched motor wire
wow
|
|
|
|
|
05-23-2012, 05:16 PM
|
#3 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 92 G9 pinched motor wire
Wow not sure how this got missed,
Mitch get a volt reading of the battery pack and see where it's at, might need to charge them, need to replace that cable and see if the solenoid will click when you press the go pedal. but that short with a battery cable to the controller, could of took out the controller. |
|
|
|
|
05-27-2012, 05:25 PM
|
#4 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 92 G9 pinched motor wire
Mitch did you ever get this thing running
|
|
|
|
|
07-10-2012, 08:37 PM
|
#5 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: 92 G9 pinched motor wire
Where's crash?? Haven't seen you lately. Not sure how this post got missed. I know about as much about electric carts as you do crash. Sure sounds like something is shorted out. Maybe these electric guys will chime in here.
 |
|
|
|
|
|
|
|
07-16-2012, 02:16 AM
|
#6 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 92 G9 pinched motor wire
check 2 small black diodes in wire harness next to controller, check glass tube older-style automotive fuse. replace pinched cable, if still no run, controller is done. controllers dont like that kind of fooling around with the big cables!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| burnt wire on motor | Electric EZGO | |||
| Help with an old ezgo motor (6 wire motor) | Electric EZGO | |||
| How to wire up a 36V EZ-GO motor for testing | Electric EZGO | |||
| Where is the engine kill wire on the FE280 motor? | Gas Club Car | |||
| Changing Ezgo pds motor 1wire to 3 wire??? | Electric EZGO | |||
Linear Mode
