|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-25-2014, 01:49 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 11
|
Where to find G14 HD FnR switch
We have a G14 that quit on us-we believe it's the controller. We plan on upgrading to a 400A so we will need a HD FnR. Does anyone know where to find these?
 P.S. New to the forum |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-25-2014, 03:04 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Where to find G14 HD FnR switch
The only available HD G14 F&R is one you make... It is as near as the nearest welder and EzGo HD F&R. Some have also used HD clubcar F&R.
|
|
|
|
|
03-25-2014, 03:05 PM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Where to find G14 HD FnR switch
He could also go with a HD reversing contactor
 |
|
|
|
|
03-25-2014, 03:36 PM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 11
|
Re: Where to find G14 HD FnR switch
Thanx guys-
CG-How hard is it to modify? Hubby can weld but isn't it a pot metal on those? or are the ezgos made from something different? ScottyB-The reversing contactor-is that a special kind of solenoid/switch combo type thing? |
|
|
|
|
03-25-2014, 03:43 PM
|
#5 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 11
|
Re: Where to find G14 HD FnR switch
Also where's the best place to get a FULL set of new wires-not just for the batts. Most places don't have the other wiring to the other components.
|
|
|
|
|
03-25-2014, 05:32 PM
|
#6 |
|
Not Yet Wild
Join Date: May 2009
Location: Central Louisiana
Posts: 46
|
Scotty has some great wires and will make to your custom length. He made me a great set for a G16.
|
|
|
|
|
03-25-2014, 06:15 PM
|
#7 | |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Where to find G14 HD FnR switch
Quote:
I always forget about those for older stuff, probably not much more $ than converting a regular HD F&R. How much are those relay setups going for? The welding required for ezgo hd conversion is only the handle stud that slips through the original f&r bracket. |
|
|
|
|
|
03-25-2014, 06:24 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Where to find G14 HD FnR switch
The rev contactor conversions start at $185. The HD EZ F&R is $169. It's almost a no brainer. $16 difference. The rocker switch and housing cost more than that.
|
|
|
|
|
03-25-2014, 07:07 PM
|
#9 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Where to find G14 HD FnR switch
Scottyb's kit would be the best bet for shure. Where do you mount them in G14/G16-e's?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| forward/reverse switch change to toggle switch | Electric Club Car | |||
| 2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
| where to find a switch? | Electric EZGO | |||
| Forward Reverse switch limit switch | Electric Club Car | |||
| Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Linear Mode
