|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-26-2014, 07:24 PM | #1 |
Not Yet Wild
Join Date: Aug 2014
Posts: 5
|
Changer resistor pack to motor controller? (Yam G9E)
Hello,
New to golf cart world. So here it goes. Bought a Yamaha G9E and I'm buying 8x 6-volt batteries for it. To make them fit I wanna remove the old coil looking thing (resistor) and get a new nice motor controller. Planning on keeping my 36 volt stock motor and running 48 volts through it and a tad bigger tires. Anyone got a recommendation for the controller. How many amps? I have 2 gauge wire all ready for it. Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2014, 07:29 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Changer resistor pack to motor controller? (Yam G9E)
Curtis makes a great controller (24 to 48 volt) , plus the correct Curtis "pot box" will bring that 36 volt motor to life. But, the f/r switch contacts are "suspect", may want to adapt one of Scottyb's (site sponsor) HD f/r (I hate this) Ezgo f/r switch's.
|
08-26-2014, 08:11 PM | #3 | |
Not Yet Wild
Join Date: Aug 2014
Posts: 5
|
Re: Changer resistor pack to motor controller? (Yam G9E)
Quote:
Also where should I mount the new controller? Just how big are they? |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Manual tire changer | Garage and Workshop | |||
Negative wire from pack to controller very hot | Electric EZGO | |||
fs: club car iq ds 2003 controller, A.S heavy duty spring pack | Golf Carts and Parts | |||
retrofit '86 series-wound motor from resistor-controller to...? | Electric EZGO | |||
Less power after changer oil question ? | Gas Yamaha |